











- Stock: Usually in UK/EU Stock
- Brand: Front Runner
- Weight: 4.80kg
- Dimensions: 578.00mm x 49.00mm x 106.00mm
Estimated delivery: UK stock 24–48 hours; EU stock 5–7 working days. Stocked bumpers around one week; made-to-order bumpers around 3–4 weeks. Special-order manufacturer lead times are confirmed with you before ordering. These are estimates; check the item-specific availability and delivery guide.
Ordinary consumer distance orders normally allow cancellation until 14 calendar days after delivery, followed by 14 days to send goods back. Necessary inspection and opening ordinary packaging do not by themselves remove this right. No fixed restocking fee applies to statutory consumer cancellation. Whole-order cancellation includes standard outbound delivery. Faulty-goods rights are additional.
Special sourcing, import or manufacture of a standard catalogue product does not by itself remove cancellation rights. Ask for postal/courier return instructions; no customer visits or in-person returns. See our Sales Terms and optional cancellation form. Earlier purchases retain applicable earlier promises.
Ask a Question About This Product
Pro Ski, Snowboard & Fishing Rod Carrier – Pair
The Front Runner RRAC149 carrier set clamps suitable skis, snowboards or fishing rods between soft rubber grippers. Two locking holders support longer equipment and keep it above the rack surface.
Features and use
- The usable opening is 495 mm, with a ratchet closure for gear up to 30 mm thick.
- A hold-open feature helps during loading.
- Covered locks protect the key openings, and four keys are included.
Compatibility and fitting
One set carries two pairs of skis or one snowboard; a second snowboard requires its bindings to be removed. The clearance between the rack/load-bar slat and the underside of the carried board or rod is 65 mm. Slimsport and Slimpro Van installations require the separate Small Side Mount Accessory Bracket specified by Dometic. Side mounting also requires the separate Recovery Device & Gear Holding Side Brackets. Check equipment thickness and clearance before use.
Specifications and contents
| Manufacturer code | RRAC149 |
|---|---|
| Usable opening | 495 mm |
| Maximum equipment thickness | 30 mm |
| Gripper width | 30 mm |
| Clearance above rack slat | 65 mm |
| Single holder dimensions | 578 × 49 × 106 mm (L × W × H) |
| Single holder weight | 2.4 kg |
| Set weight | 4.8 kg |
| Capacity per set | 2 pairs of skis or 1 snowboard; 2 boards with bindings removed |
| Material | Black powder-coated steel; rubber grippers |
| Contents | 2 holders; 4 rubber grippers; 4 keys; 2 side-mount brackets; installation hardware |
| Side mounting | Separate Recovery Device & Gear Holding Side Brackets required |
| Compatibility | Front Runner racks — see fitting requirements |
Standard UK delivery costs £10.99 for orders under £500 and is free from £500. For island addresses or other destinations requiring special delivery arrangements, contact ofm4x4.co.uk before ordering. Any delivery charge is shown separately at checkout.
| Camping & Rack Accessory Specifications | |
| Manufacturer code | RRAC149 |
| Contents | 2 holders; 4 rubber grippers; 4 keys; 2 side-mount brackets; installation hardware |
| Compatibility | Front Runner racks — see fitting requirements |
| Material | Black powder-coated steel; rubber grippers |
| Usable opening | 495 mm |
| Maximum equipment thickness | 30 mm |
| Gripper width | 30 mm |
| Clearance above rack slat | 65 mm |
| Single holder dimensions | 578 × 49 × 106 mm (L × W × H) |
| Single holder weight | 2.4 kg |
| Set weight | 4.8 kg |
| Capacity per set | 2 pairs of skis or 1 snowboard; 2 boards with bindings removed |
| Side mounting | Separate Recovery Device & Gear Holding Side Brackets required |














-1000x1000w-150x150.jpg)





























