-32x32h.jpg){kind=small}
-32x32h.jpg){kind=small}
-32x32h.jpg){kind=small}
-1000x1000h-32x32.jpg){kind=small}
-32x32.png){kind=small}
-32x32w.jpg){kind=small}
-1000x1000w-150x150.jpg "DT Adventure Portable Camping 55L Compressor Car Fridge Freezer")
-1000x1000w-150x150.jpg "DT Adventure Portable Camping 55L Compressor Car Fridge Freezer")
- Stock: Special Order
- Brand: Low Range Off-Road
Estimated delivery: UK stock 24–48 hours; EU stock 5–7 working days. Stocked bumpers around one week; made-to-order bumpers around 3–4 weeks. Special-order manufacturer lead times are confirmed with you before ordering. These are estimates; check the item-specific availability and delivery guide.
Ordinary consumer distance orders normally allow cancellation until 14 calendar days after delivery, followed by 14 days to send goods back. Necessary inspection and opening ordinary packaging do not by themselves remove this right. No fixed restocking fee applies to statutory consumer cancellation. Whole-order cancellation includes standard outbound delivery. Faulty-goods rights are additional.
Special sourcing, import or manufacture of a standard catalogue product does not by itself remove cancellation rights. Ask for postal/courier return instructions; no customer visits or in-person returns. See our Sales Terms and optional cancellation form. Earlier purchases retain applicable earlier promises.
Ask a Question About This Product
Front Knuckle & Wheel Bearing Rebuild Kit for Toyota Land Cruiser FJ80
Refresh the front swivel hub assemblies on your Toyota Land Cruiser FJ80 with this Low Range Off-Road knuckle rebuild kit. It brings together wheel bearings, kingpin bearings and sealing components for a front axle overhaul, including Koyo bearings and OEM inner axle seals.
Part number: TLC-AX-KRB-FJ80K-OEM
Supplier-listed application: Toyota Land Cruiser FJ80, 1990–1997.
Key Features
- Over 60 components for servicing the front steering knuckle and hub assemblies.
- Koyo wheel bearings and knuckle kingpin bearings.
- OEM inner axle seals and felt seal pads.
- Trunnion/kingpin bearing shims supplied in two thicknesses.
What’s Included
- Koyo wheel bearings.
- Knuckle kingpin bearings.
- OEM inner axle seals.
- Knuckle seals, gaskets and hub seals.
- Trunnion/kingpin bearing shims in two thicknesses.
- OEM felt seal pads.
- Hub dial O-rings.
The supplier describes the kit as containing over 60 components. The list above identifies the component groups; a full item-by-item quantity breakdown is not supplied.
Vehicle Compatibility
Listed by the supplier for the 1990–1997 Toyota Land Cruiser FJ80. Please check your vehicle’s chassis code and existing front axle configuration before ordering. Compatibility with HDJ80, HZJ80, FZJ80 or other Land Cruiser variants has not been confirmed for this listing. Contact OFM4x4.co.uk with your vehicle details if you need a fitment check.
Installation
Professional installation is recommended. The installer should inspect the dismantled components and use the correct Toyota workshop procedure for bearing adjustment, shimming, lubrication and tightening torques. Do not assume that installing new bearings alone will rectify wear elsewhere in the axle assembly.
Availability
Special order. Contact OFM4x4.co.uk to confirm current availability and lead time before ordering.
Frequently Asked Questions
Does this kit include wheel bearings?
Yes. Koyo wheel bearings are included, together with knuckle kingpin bearings.
Are OEM inner axle seals included?
Yes. This is the OEM inner axle seal version, identified by part number TLC-AX-KRB-FJ80K-OEM.
Is this the same as a swivel hub rebuild kit?
The steering knuckle assembly is also commonly called the swivel hub. This kit combines knuckle rebuild components with wheel bearings; check the contents above against the work your axle requires.
Will it fit every Toyota Land Cruiser 80 Series?
The supplier lists FJ80 models from 1990 to 1997. Fitment to other 80 Series chassis codes needs confirmation before purchase.
Are grease, tools and replacement axle shafts included?
These are not listed in the supplier’s stated kit contents. Arrange any additional workshop consumables, tools or replacement parts separately.
