











- Stock: Usually in UK/EU Stock
- Brand: Front Runner
- Weight: 56.40kg
- Dimensions: 1,514.00mm x 1,199.00mm x 112.00mm
Estimated delivery: UK stock 24–48 hours; EU stock 5–7 working days. Stocked bumpers around one week; made-to-order bumpers around 3–4 weeks. Special-order manufacturer lead times are confirmed with you before ordering. These are estimates; check the item-specific availability and delivery guide.
Ordinary consumer distance orders normally allow cancellation until 14 calendar days after delivery, followed by 14 days to send goods back. Necessary inspection and opening ordinary packaging do not by themselves remove this right. No fixed restocking fee applies to statutory consumer cancellation. Whole-order cancellation includes standard outbound delivery. Faulty-goods rights are additional.
Special sourcing, import or manufacture of a standard catalogue product does not by itself remove cancellation rights. Ask for postal/courier return instructions; no customer visits or in-person returns. See our Sales Terms and optional cancellation form. Earlier purchases retain applicable earlier promises.
Ask a Question About This Product
Front Runner Load Bed Cargo Slide Medium 250 kg
Reach equipment in a covered cargo area using a 1514 × 1199 mm medium cargo slide with a 250 kg load rating and hold-open operation.
Fitment and installation
Universal dimension-dependent installation for a covered pickup bed or suitable interior cargo area. Requires at least 1095 mm between wheel arches. Mount to a flat supporting surface; drilling may be required. Installation needs an M6/M8 Rivnut tool, sold separately.
Features and equipment
- Hold-open feature helps prevent unwanted closing on uneven surfaces.
- Push-to-close dual latch secures the tray during travel.
- Sealed bearings allow nearly full tray extension.
- Two accessory channels and multiple tie-down points support compatible securing straps.
- Interior use only, under a canopy, camper shell or another suitable bed cover.
Specifications
| Manufacturer code | SSBS008 |
|---|---|
| Vehicle compatibility | Universal covered pickup bed or suitable vehicle cargo area; check measured fit |
| Closed dimensions | 1514 L × 1199 W × 112 H mm |
| Inner tray dimensions | 1485 L × 1011 W × 50 H mm |
| Required wheel-arch spacing | 1095 mm minimum |
| Weight | 56.4 kg |
| Load rating | 250 kg |
| Material | Black powder-coated steel; laminated plywood; carpet |
| Accessory channels | 2 |
| Mounting type | Flat cargo-floor mounting; drilling may be required |
| Required installation tool | M6/M8 Rivnut tool, sold separately |
| Use restriction | Interior/covered cargo area only |
| Bed liner preparation | Measure with liner fitted; modification may be required |
| Kit contents | One cargo-slide unit; two accessory channels; installation hardware and instructions |
| Manufacturer storage-system warranty | 2 years, subject to manufacturer terms |
Measure the installation space
Measure the usable cargo area with any bed liner, trim and other accessories in place. Check wheel-arch spacing, mounting access, door or tailgate clearance and the space needed when fully extended. Secure the base to a suitable supporting surface using the manufacturer’s fitting method.
Include the system’s own weight when calculating the remaining vehicle payload. Secure cargo to the intended tie-down points, distribute it evenly and stay within the lower applicable system and vehicle limits. Fridges, boxes and other equipment shown in photographs are supplied only when expressly included in the kit contents.
Read the installation guide before assembly and choose additional accessories for the exact mounting system and dimensions specified above. Separately shown cargo and accessories are not included unless expressly listed.
UK delivery
Standard UK delivery costs £10.99 for orders under £500 and is free from £500. For island addresses or other destinations requiring special delivery arrangements, contact ofm4x4.co.uk before ordering. Any delivery charge is shown separately at checkout.
| Camping & Rack Accessory Specifications | |
| Manufacturer code | SSBS008 |
| Weight | 56.4 kg |
| Material | Black powder-coated steel; laminated plywood; carpet |
| Closed dimensions | 1514 L × 1199 W × 112 H mm |
| Load rating | 250 kg |
| Accessory channels | 2 |
| Bed liner preparation | Measure with liner fitted; modification may be required |
| Inner tray dimensions | 1485 L × 1011 W × 50 H mm |
| Kit contents | One cargo-slide unit; two accessory channels; installation hardware and instructions |
| Manufacturer storage-system warranty | 2 years, subject to manufacturer terms |
| Mounting type | Flat cargo-floor mounting; drilling may be required |
| Required installation tool | M6/M8 Rivnut tool, sold separately |
| Required wheel-arch spacing | 1095 mm minimum |
| Use restriction | Interior/covered cargo area only |
| Vehicle compatibility | Universal covered pickup bed or suitable vehicle cargo area; check measured fit |














-1000x1000w-150x150.jpg)































