Base Lift kit TeraFlex Lift 4,5" – Jeep Wrangler JL 2-door

Vehicle fitment

Jeep Wrangler JL 2-door — 2.0L / 3.6L engines. Product reference: TX1402402.

Check the installation requirements and exclusions below. Please confirm the model year and left- or right-hand-drive configuration with OFM4x4 before ordering.

Lift your vehicle with suspension kit from TeraFlex

The TeraFlex JL 2-Door: 4.5” Coil Spring Base Lift Kit includes the basic pieces needed to lift your JL Wrangler to conquer the most extreme trails and conditions. Every TeraFlex suspension system is engineered with drivability and performance in mind. Properly developed suspension geometry, roll center, load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. Does NOT include shocks. 

Specs:

Lift Height: 4,5”

Dependable performance w/ zero worries

Positive, responsive handling

Full range of movement for off-road

Install and drive

All factory stability controls remain functional 

Max Tyre Diameter:

Sport/Sahara: 35” (w/ 3” front & 2.5” rear bump stops)

Sport/Sahara : 37” (w/ 3.5” front & 4” rear bump stops)

Rubicon : 37” (w/ 2.5” front & 3” rear bump stops)  

In the box:

(2) Front coil springs

Front HD forged track bar bracket 

(2) Front longer sway bar links 11,5” 

(2) Rear coil springs

Rear HD forged adjustable track bar bracket

(2) Rear longer sway bar links 10,75” 

Front & rear 2" bump stop strike pad kit

Front & rear 0,5" bump stop strike pad shim kit

Hardware 

Notes:

Caster Correction required (sold separately). Recommended components: Front Control Arm Sport Bracket Kit (1938125), or adjustable 8-Arm Short Control Arm Kit (Alpine: 1416610 or Alpine IR: 1416510), or adjustable 8-Arm Long Control Arm & Bracket Kit (Alpine: 1316010 or Alpine IR: 1310510), and/or HD Forged Adjustable Track Bar(s) (Front: 1753420 or Rear: 1754420).

Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres

Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tires

Sport/Sahara models require an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) in order to fit 37” tyres

Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tyres, JL/JLU: Front Control Arm Sport Brackets 1938125 recommended to correct caster angles and restore factory geometry

Requires longer shocks (not included in base kit) – 2-3.5” Lift Falcon Series 2.1 Monotube, 2-4.5” Lift Falcon Series 3.1 Piggyback, or 2-4.5” Lift Falcon Series 3.3 Fast Adjust Piggyback shock absorbers (sold separately)