Stainless Braided Brake Lines Kit for Toyota Land Cruiser Prado 90 / 95 Series (1996–2003) KDJ / KZJ

Stainless Braided Brake Lines Kit for Toyota Land Cruiser Prado 90 / 95 Series 1996–2003 KDJ / KZJ

This stainless braided brake line kit is designed specifically for Toyota Land Cruiser Prado 90 and 95 Series models (1996–2003), including KDJ and KZJ variants. Manufactured in the UK to a high standard, these hoses replace the factory rubber brake lines to reduce expansion under braking pressure, delivering a firmer pedal feel and more consistent braking performance.

The kit is suitable for vehicles used on-road and off-road and is especially beneficial for lifted Prados, towing setups and vehicles running larger tyres. Custom hose lengths can be supplied to suit suspension lift kits, ensuring safe routing and correct slack at full axle droop.

Key Features

• Vehicle-specific braided brake line kit for Toyota Land Cruiser Prado 90 / 95
• Compatible with KDJ and KZJ engine variants
• Firmer brake pedal feel compared to standard rubber hoses
• Improved braking consistency under load and heat
• PTFE inner core with stainless steel braid
• Protective outer coating for abrasion and corrosion resistance
• Custom lengths available for suspension lifts

Vehicle Compatibility

• Toyota Land Cruiser Prado 90 Series
• Toyota Land Cruiser Prado 95 Series
• Model years: 1996–2003
• Engine codes: KDJ / KZJ variants

If you are unsure about your exact Prado variant or braking configuration, contact us with your VIN or vehicle details, and we will confirm the correct kit.

Lifted Vehicles & Custom Hose Lengths

For vehicles fitted with suspension lift kits, extended braided brake lines are strongly recommended. Custom hose lengths can be supplied to suit your setup.

• Tell us your lift height (e.g. 50 mm / 2", 75 mm / 3", 100 mm / 4")
• Advise if extended radius arms, drop brackets, or relocated mounts are fitted
• Photos of the axle at full droop can help ensurethe  correct hose length

What’s Included

• Stainless braided brake hoses (vehicle-specific flexible line set)
• Required banjo bolts (where applicable)
• Copper crush washers (where applicable)
• Basic installation guidance

Technical Specifications

• Inner hose: PTFE (Teflon)
• Outer: Stainless steel braid with protective PVC cover
• Fittings: Stainless steel
• Working pressure: approx. 290 bar
• Burst pressure: approx. 870 bar
• Temperature range: -70°C to +260°C

Installation Notes

• Professional installation is strongly recommended
• The brake system must be fully bled after installation
• Check hose clearance at full steering lock and full suspension droop
• Recheck all fittings after the first test drive

Recommended Use Cases

• Lifted Toyota Land Cruiser Prado 90 / 95 builds
• Touring and overland vehicles
• Towing caravans, trailers and boats
• Off-road and greenlaning use

Shipping & Delivery

• UK delivery via tracked courier
• Custom-length hoses may require additional build time
• If you need the kit by a specific date, contact us before ordering

FAQs

Does this kit fit all Prado 90 and 95 models?
It is designed for Prado 90 and 95 Series models (1996–2003), including KDJ and KZJ variants. If unsure, contact us with your VIN.

Can I order extended brake lines for a lift kit?
Yes. Provide your lift height and suspension setup, and we can supply the correct hose lengths.

Will braided brake lines improve braking performance?
Braided hoses reduce expansion under pressure, resulting in a firmer pedal and more consistent braking feel.

Is a professional fitting required?
Professional fitting is strongly recommended for safety and correct system bleeding.