
- Stock: Usually in UK/EU Stock
- Brand: Dobinsons
- Weight: 19.00kg
- Dimensions: 55.00cm x 37.00cm x 20.00cm
Estimated delivery: UK stock 24–48 hours; EU stock 5–7 working days. Stocked bumpers around one week; made-to-order bumpers around 3–4 weeks. Special-order manufacturer lead times are confirmed with you before ordering. These are estimates; check the item-specific availability and delivery guide.
Ordinary consumer distance orders normally allow cancellation until 14 calendar days after delivery, followed by 14 days to send goods back. Necessary inspection and opening ordinary packaging do not by themselves remove this right. No fixed restocking fee applies to statutory consumer cancellation. Whole-order cancellation includes standard outbound delivery. Faulty-goods rights are additional.
Special sourcing, import or manufacture of a standard catalogue product does not by itself remove cancellation rights. Ask for postal/courier return instructions; no customer visits or in-person returns. See our Sales Terms and optional cancellation form. Earlier purchases retain applicable earlier promises.
Ask a Question About This Product
The C45-136 set gives the front axle a matched pair of Dobinsons coil springs for the specified Patrol suspension setup.
Fitment and specifications
- Nissan Patrol Y60/Y61 SWB wagon
- 75 mm nominal suspension setup
- Pair of two front coil springs for one axle
- Powder-coated coil springs
- Select the spring by vehicle and axle configuration
- Left spring height 440 mm
- Right spring height 425 mm
- Spring rate 39 N/mm
Product image shows the relevant Dobinsons range and may be representative. Refer to the part number and pack quantity for this listing.
Frequently asked questions
Which vehicle does C45-136 fit?
The listed application is Nissan Patrol Y60/Y61 SWB wagon. Match chassis code, body type and engine where shown.
What is included in one order unit?
Pair of two front coil springs for one axle. The price covers the pair.
What suspension height or mounting setup is this for?
The listed lift is 75 mm on the specified configuration. Actual ride height depends on springs, vehicle weight and suspension geometry.
What should I check before choosing this part?
Select the spring rate to suit permanent accessories and normal running weight on this axle.
What else should be inspected during fitment?
Check front axle weight, engine and permanent accessories such as a steel bumper or winch.
How do I identify the correct Dobinsons part?
Use the complete reference C45-136, including any letters at the end, and compare it with the fitment guide for your Patrol.
Is professional installation recommended?
A qualified 4x4 fitter can confirm the required hardware and check clearances and steering alignment after installation.












-150x150h.jpg)


-1000x1000w-150x150.jpg)






















