IOD Performance Rear Anti-Roll Bar Link Kit (3″ Lift – Non-Electric Sway Bar) – Nissan Patrol Y61 (SKU: IOD-00S39)

Fix the sway bar angle after a proper lift. The IOD Performance Rear Anti-Roll Bar Link Kit is built for Nissan Patrol Y61 models running a +3″ suspension lift that do NOT have the electrically disconnectable stabiliser system (no Stabi-Off function).

At +3″, factory-length rear links can leave the stabiliser sitting at the wrong angle, preloading the bar and restricting movement. This kit corrects the geometry so the rear anti-roll bar can work as intended — improving stability on-road and reducing binding during suspension travel.

Designed Specifically For

• Nissan Patrol Y61 with +3″ suspension lift
• Rear axle application
• Vehicles without Stabi-Off / without an electric stabiliser disconnect

Key Benefits

• Restores correct rear sway bar geometry after a +3″ lift
• Helps reduce unwanted stabiliser preload
• Improves predictable handling and stability
• Reduces binding through suspension travel on lifted setups

Material & Durability

• Stainless steel construction for corrosion resistance
• Designed for year-round use in harsh conditions
• Suitable for daily driving, touring and off-road use

Vehicle Compatibility

• Nissan Patrol Y61
• Rear anti-roll bar (sway bar)
• Lift requirement: +3″ suspension lift
• Not suitable for vehicles with an electrically disconnectable stabiliser

What’s Included

• 1 × IOD Performance Rear Anti-Roll Bar Link Kit (3″ Lift – Non-Electric) – SKU: IOD-00S39
• 1 × Complete rear link set (as supplied)
• 1 × Installation hardware pack

Installation Notes

• Rear-only kit
• Install with the vehicle at normal ride height
• Professional installation recommended
• Re-check the torque after the first drive and after initial off-road use

Important Compatibility Notice

This kit is designed for Y61 models without the electrically disconnectable stabiliser system. If your vehicle has Stabi-Off/electric disconnect, you need the dedicated Stabi-Off version.

FAQs

1) What lift height is this kit designed for?
It is designed for a +3″ suspension lift on the Nissan Patrol Y61.

2) Will it fit Y61 models with an electric sway bar disconnect?
No. This kit is for non-electric stabiliser models only.

3) Is this for the front or rear?
This is a rear anti-roll bar link kit.

4) What issues does it solve on lifted vehicles?
It helps correct sway bar angle, reduces preload, and can reduce binding/noise caused by incorrect geometry after a lift.

5) Does it remove the anti-roll bar?
No. It maintains normal stabiliser function with the correct link length for +3″ lift geometry.

6) Is stainless steel worth it?
Yes. Stainless steel improves corrosion resistance — ideal for winter roads, mud and wet off-road conditions.