Ironman 4x4 Foam Cell Pro Rebuildable Suspension Lift Kit +50mm for Toyota Land Cruiser Prado J90 Short Wheelbase (1996–2002)

Ironman 4x4 Foam Cell Pro Rebuildable Suspension Lift Kit +50mm for Toyota Land Cruiser Prado J90 Short Wheelbase (1996–2002)

This Ironman 4x4 Foam Cell Pro rebuildable suspension lift kit delivers approximately +50mm of lift over factory ride height for the Toyota Land Cruiser Prado J90 Short Wheelbase (1996–2002). It is Ironman’s premium suspension solution, designed for demanding off-road use, constant accessory weight and long-distance touring.

Featuring Foam Cell Pro monotube shock absorbers with a large 2.0" internal bore, this system offers exceptional oil volume, superior heat control and fully rebuildable serviceability—ideal for vehicles that are worked hard and expected to perform consistently in harsh conditions.

Key Features

• Approx. +50mm suspension lift over standard ride height
• Premium Ironman Foam Cell Pro rebuildable shock absorbers
• Large 2.0" bore monotube design for maximum oil capacity
• Fully rebuildable and serviceable for long-term ownership
• Exceptional resistance to heat and shock fade
• Engineered for extreme off-road and expedition use

Vehicle Compatibility

• Toyota Land Cruiser Prado J90
• Body type: Short Wheelbase (3-door)
• Model years: 1996–2002

This kit is designed exclusively for Prado J90 short wheelbase models. It is not suitable for long wheelbase J95 vehicles.

What’s Included

• Ironman Foam Cell Pro front shock absorbers × 2
• Ironman Foam Cell Pro rear shock absorbers × 2
• Front coil springs × 2
• Rear coil springs × 2
• Required bushes and mounting hardware

Foam Cell Pro Technology

• 2.0" internal bore monotube shock design
• Foam cell technology eliminates aeration
• Fully rebuildable and serviceable construction
• High-strength alloy body for durability
• Consistent damping under extreme conditions

Ride & Load Characteristics

This suspension setup is intended for constant additional weight and aggressive off-road use. Compared to standard Foam Cell or NitroGas kits, Foam Cell Pro offers firmer control, higher durability and improved performance when heavily loaded.

Installation Notes

• Professional installation is strongly recommended
• Wheel alignment is required after fitting
• Check brake hose and ABS wire clearance at full droop
• Re-torque suspension fasteners after initial use

Recommended Use

• Short wheelbase expedition and overland builds
• Vehicles fitted with steel bumpers, winches or recovery gear
• Frequent off-road and harsh terrain use
• Long-distance touring where reliability is critical

FAQs

1. How much lift does this kit provide?
Approximately +50mm over factory ride height.

2. What makes Foam Cell Pro different from standard Foam Cell?
Foam Cell Pro shocks feature a larger bore, monotube design, and are fully rebuildable, making them ideal for extreme use and long-term serviceability.

3. Is this suitable for daily driving?
Yes, but it is firmer than NitroGas or standard Foam Cell and best suited to vehicles carrying additional weight.

4. Can the shocks be rebuilt or serviced?
Yes. Foam Cell Pro shock absorbers are fully rebuildable and serviceable.

5. Will this fit Prado J95 long wheelbase models?
No. This kit is designed only for Prado J90 short wheelbase vehicles.

6. Does this kit include a warranty?
Yes. Ironman 4x4 Foam Cell Pro suspension components are supplied with a manufacturer's warranty.