Ironman 4x4 FoamCell Pro KDSS Suspension Lift Kit +50mm – Toyota Land Cruiser Prado 150 (KDSS Equipped)

Lift and correct your Toyota Land Cruiser Prado 150 with KDSS using the Ironman 4x4 FoamCell Pro Suspension Lift Kit. This kit delivers an approximate +50 mm lift over factory ride height and is designed specifically to work with KDSS (Kinetic Dynamic Suspension System).

FoamCell Pro is Ironman’s premium, heavy-duty shock technology. The shocks are serviceable and rebuildable, making this an excellent choice for long-term ownership, overlanding, towing, and repeated off-road use. The kit also includes KDSS-specific correction parts to keep the system operating properly after lifting.

Key Features

• Approx. +50 mm suspension lift
• FoamCell Pro rebuildable shocks for sustained hard use
• KDSS-compatible setup with correction components
• Improved stability, control, and ground clearance
• Rear axle centring correction (panhard solution included)

Vehicle Compatibility

• Toyota Land Cruiser Prado 150 – KDSS-equipped models only
• Diesel and petrol variants (KDSS only)

Important: KDSS is not fitted to all Prado 150 models. If you are unsure, contact us with your VIN or a photo of the KDSS hardware.

What’s Included

• 2 × Front FoamCell Pro rebuildable strut shock absorbers (0–50 mm lift)
• 2 × Rear FoamCell Pro rebuildable shock absorbers (0–50 mm lift)
• 2 × Front coil springs (+50 mm, matched rate)
• 2 × Rear coil springs (+50 mm, matched rate)
• 1 × KDSS correction components (to maintain KDSS operation after lift)
• 1 × Rear panhard solution (to recenter rear axle after lifting)

All components are genuine Ironman 4x4 parts, supplied new and matched as a complete kit.

Load & Usage Recommendation

• Ideal for standard to moderately loaded touring vehicles
• Excellent for towing and overlanding builds
• Designed for consistent damping under load and heat

If your Prado has constant heavy accessories (steel bumpers, winch, rear carrier, drawers, roof tent), contact us for spring-rate advice.

Installation Notes

• Professional installation recommended (KDSS setup matters)
• Wheel alignment is required after fitting
• Rear axle centring is corrected using the included panhard solution

Estimated fitting time: 4–6 hours

Warranty & Serviceability

• FoamCell Pro shocks are fully rebuildable and serviceable
• Designed for extended service life in harsh conditions

FAQs

Q: What is KDSS?
A: KDSS stands for Kinetic Dynamic Suspension System. It uses hydraulics to adjust sway bar behaviour for stability on-road and articulation off-road.

Q: Will this kit fit a Prado 150 without KDSS?
A: This kit is designed around KDSS correction parts. If your Prado does not have KDSS, you should use the standard FoamCell Pro kit instead.

Q: How much lift will I get?
A: Approximately +50 mm over factory height. Actual lift depends on vehicle condition and constant load.

Q: Are FoamCell Pro shocks rebuildable?
A: Yes. FoamCell Pro shocks are fully rebuildable, ideal for long-term ownership and hard use.

Q: Do I need a wheel alignment after fitting?
A: Yes. A professional alignment is required after installation.

Q: Why is a panhard correction included?
A: Lifting a vehicle shifts the rear axle slightly. The included solution helps recenter the axle for better handling and tyre clearance.

Why Buy from OFM4x4 UK

• Authorised Ironman 4x4 distributor
• UK & EU warehouse support
• Specialist KDSS and suspension advice
• Fast delivery and reliable after-sales support