Ironman 4x4 FoamCell PRO Suspension Lift Kit +50mm – Nissan Navara D23 (NP300)

Upgrade your Nissan Navara D23 (NP300) with the Ironman 4x4 FoamCell PRO Suspension Lift Kit, the most advanced suspension option in the Ironman range. Designed for very intense off-road use, heavy touring, and expedition builds, this kit delivers exceptional durability, control, and heat management.

This configuration provides approximately +40 mm front lift and +50 mm rear lift, depending on vehicle setup. The front springs are specified for 3.0-litre engines or 2.5-litre engines carrying 50–80 kg of permanent front load, such as a bull bar or winch.

FoamCell PRO shock absorbers are rebuildable, adjustable, and engineered for extreme conditions. With increased oil volume and advanced valving, they maintain consistent damping under sustained abuse, corrugations, and heavy loads.

Key Features

• Approx. +40–50 mm suspension lift
• FoamCell PRO rebuildable shock absorbers
• Adjustable front struts for precise setup
• Rear springs rated for heavy, constant load
• Designed for extreme off-road and expedition use

Vehicle Compatibility

• Nissan Navara D23 / NP300
• 3.0-litre engines
• 2.5-litre engines with 50–80 kg permanent front load

What’s Included

• 2 × Front FoamCell PRO adjustable strut shock absorbers – rebuildable, 0–50 mm Part code: 45716FE
• 2 × Front coil springs – for 3.0 engine or 2.5 with 50–80 kg load, +40 mm Part code: NISS040C
• 2 × Rear FoamCell PRO shock absorbers – rebuildable, 0–50 mm Part code: 45728FE
• 2 × Rear coil springs – Performance 0–300 kg, +50 mm lift Part code: NISS058B

All components are genuine Ironman 4x4 parts, supplied new and correctly matched as a complete FoamCell PRO suspension system.

Load & Usage Recommendation

• Front springs designed for vehicles fitted with bull bars and winches
• Rear springs rated for 0–300 kg constant load
• Ideal for expedition builds, towing, remote travel, and extreme off-road use

Installation

• Direct bolt-on installation
• No cutting or welding required
• Wheel alignment required after installation
• Professional installation strongly recommended

Estimated fitting time: 5–7 hours

FAQs

Q: What makes FoamCell PRO different from standard FoamCell?
A: FoamCell PRO shocks are rebuildable, adjustable, and designed for extreme heat and sustained off-road abuse.

Q: Why is the front lift lower than the rear?
A: The front springs are load-rated for heavier engines or accessories and provide ~40 mm lift, while the rear provides ~50 mm.

Q: Is this kit suitable for overlanding and expeditions?
A: Yes. This is Ironman’s highest-spec suspension option for the Navara D23.

Why Buy from OFM4x4 UK

• Authorised Ironman 4x4 distributor
• UK & EU warehouse support
• Correct spring-rate and load configuration advice
• Fast delivery and reliable after-sales support