













- Stock: Made to Order
- Brand: Motoproject
- Weight: 50.00kg
Ask a Question About This Product
MotoProject Steel Rear Bumper with Spare Wheel Carrier – Nissan Patrol Y61 GU4 2004-on
The MotoProject Steel Rear Bumper for Nissan Patrol Y61 GU4 is a heavy-duty replacement rear bumper designed for the facelift Nissan Patrol Y61 / GU4 from 2004-on. Built for off-road, expedition and working vehicles, it replaces the standard rear bumper with a substantially stronger steel assembly and incorporates a rear-mounted spare wheel carrier.
The bumper is supplied in a matte black fine-texture powder-coated finish and includes the required mounting bolts. MotoProject lists the bumper at approximately 50 kg.
Moving the spare wheel onto the heavy-duty rear bumper is particularly useful on modified Patrols running larger or heavier tyres, while the steel bumper also provides substantially greater protection to the rear bodywork during demanding off-road use.
Manufacturer: MotoProject
Application: Nissan Patrol Y61 GU4 / facelift model 2004-on
Manufacturer Reference: PAT_GU4_004
Approximate Bumper Weight: 50 kg
Important: the manufacturer states that this bumper does not have road homologation / type approval. Buyers are responsible for checking whether the product is suitable and legal for their intended road use and jurisdiction.
Designed for the Nissan Patrol Y61 GU4
This rear bumper is designed for the GU4 facelift version of the Nissan Patrol Y61. Nissan introduced the significant Y61 facelift for the 2004/2005 model period, including revised bodywork, headlights, wheel arches and rear lighting.
| Vehicle | Nissan Patrol |
| Generation | Y61 / GU |
| Version | GU4 / Facelift |
| Application | 2004-on |
| Position | Rear |
Important fitment note: this listing is specifically for the GU4 / facelift body configuration. Earlier Y61 rear bumpers are a separate application.
Heavy-Duty Steel Rear Protection
The standard rear bumper on a Nissan Patrol is designed primarily for normal road use and cosmetic protection. A steel replacement bumper provides a much more substantial barrier between the vehicle body and rocks, banks, trees, ruts and other obstacles encountered off road.
This makes the MotoProject bumper particularly suitable for Patrols used for:
- Off-road driving
- Green laning
- Overlanding
- Expedition travel
- Working and utility use
- Remote-area travel
- Vehicles running larger off-road tyres
- Vehicles requiring an external spare wheel carrier
Integrated Spare Wheel Carrier
The basic bumper package includes a spare wheel carrier.
Mounting the spare wheel to a dedicated heavy-duty rear carrier can be particularly beneficial when fitting larger or heavier wheel and tyre combinations that place additional load on the factory rear-door mounting arrangement.
It also integrates the spare wheel into the rear protection system rather than relying solely on the original door-mounted carrier.
Matte Black Powder-Coated Finish
The MotoProject bumper is supplied in a matte black powder-coated finish with a fine-texture surface.
Powder coating provides a durable exterior finish suitable for off-road accessories while giving the bumper a purposeful appearance that complements the Patrol's bodywork.
As with any steel off-road bumper, damage to the coating caused by rocks or impacts should be repaired promptly to maintain corrosion protection.
Approx. 50 kg Construction
MotoProject lists the finished bumper at approximately 50 kg.
The additional weight of a steel rear bumper and spare wheel carrier should be considered when setting up the vehicle's suspension, especially on Patrols carrying other permanent accessories such as:
- Roof racks
- Roof tents
- Drawer systems
- Auxiliary fuel tanks
- Recovery equipment
- Camping equipment
- Heavy-duty tow equipment
Where substantial permanent rear load is carried, appropriate rear spring selection may be required to maintain ride height and handling.
Technical Specifications
| Brand | MotoProject |
| Product Type | Heavy-Duty Steel Rear Bumper |
| Vehicle | Nissan Patrol Y61 |
| Version | GU4 / Facelift |
| Application Years | 2004-on |
| Position | Rear |
| Material | Steel |
| Finish | Matte Black Powder Coat |
| Surface Finish | Fine Texture |
| Spare Wheel Carrier | Included |
| Mounting Bolts | Included |
| Approximate Bumper Weight | 50 kg |
| Manufacturer Reference | PAT_GU4_004 |
| Road Homologation / Type Approval | No – manufacturer states product is not road homologated |
What’s Included
- 1 × MotoProject Steel Rear Bumper for Nissan Patrol GU4
- 1 × Spare Wheel Carrier
- Mounting Bolts
Rear Bumper Upgrade for Off-Road Patrol Builds
A steel rear bumper is one of the key protection upgrades for a Nissan Patrol that regularly leaves paved roads.
The rear corners of a long-wheelbase 4x4 can be particularly vulnerable when descending steep obstacles because the vehicle's rear overhang can contact the terrain before the rear tyres reach the same point.
A heavy-duty steel bumper helps protect the vulnerable rear bodywork and provides a more robust structure for the spare-wheel carrier.
Suitable for Larger Spare Wheels
Modified Nissan Patrols are frequently fitted with larger off-road tyres, increasing both the diameter and weight of the spare wheel.
A dedicated bumper-mounted carrier provides a heavy-duty solution for supporting the spare wheel and can reduce reliance on the original rear-door mounting arrangement.
Always ensure the wheel and tyre combination is correctly secured and that the carrier is fully latched before driving.
Suspension Considerations
The bumper itself weighs approximately 50 kg, before taking into account the spare wheel and tyre mounted to the carrier.
For example, a large off-road wheel and tyre combination can add substantial permanent rear axle load. When combined with other touring equipment, the total constant load can become significant.
If the vehicle sits low at the rear after installation, consider using rear springs selected for the vehicle's actual permanent load rather than simply increasing spring rate without taking the complete vehicle setup into account.
Installation
The bumper is supplied with mounting bolts for installation onto the vehicle.
Because of the size and approximate 50 kg weight of the bumper, installation should ideally be carried out with suitable lifting equipment and assistance.
- Confirm vehicle is the GU4 / facelift Y61 application before installation
- Remove the original rear bumper components as required
- Inspect the rear chassis mounting points before fitting
- Repair any corrosion or damaged mounting areas before installation
- Use the supplied mounting hardware
- Support the bumper safely during positioning
- Ensure all fasteners are correctly tightened
- Check spare-wheel carrier operation before use
- Recheck mounting hardware after initial use
Professional installation is recommended where appropriate.
Road Use & Homologation
The manufacturer explicitly states that this product does not have road homologation / type approval.
This is important for customers intending to use the vehicle on public roads. Regulations for modified bumpers and external vehicle accessories vary by country and vehicle use.
The purchaser and vehicle operator are responsible for confirming whether the bumper is permitted for their intended application and for complying with applicable construction, insurance and road-use requirements.
Explore More Steel Rear Bumpers
Looking for a rear bumper for another 4x4 or comparing different manufacturers? Browse the complete 4x4 Steel Rear Bumpers category at OFM4x4.co.uk.
The category includes vehicle-specific heavy-duty rear bumpers and rear protection systems from multiple 4x4 manufacturers.
Frequently Asked Questions
Q1: Which Nissan Patrol does this bumper fit?
A: The bumper is designed for the Nissan Patrol Y61 GU4 / facelift model.
Q2: What years does the GU4 bumper fit?
A: The GU4 facelift was introduced around the 2004 model change. OFM4x4.co.uk therefore lists this product as a 2004-on GU4 / facelift Y61 application. Vehicle body configuration should be confirmed before ordering.
Q3: Is this the same bumper as the earlier Nissan Patrol Y61 rear bumper?
A: No. MotoProject lists the GU4 bumper separately from the earlier Y61 rear bumper, so the correct body version should be selected.
Q4: Is the bumper made from steel?
A: Yes. This is a heavy-duty steel rear bumper.
Q5: What finish does the bumper have?
A: The bumper is supplied in matte black powder coat with a fine-texture finish.
Q6: Is the spare wheel carrier included?
A: Yes. The manufacturer's basic version includes the spare wheel carrier.
Q7: Are mounting bolts included?
A: Yes. MotoProject lists the mounting bolts as included.
Q8: How much does the bumper weigh?
A: MotoProject lists the bumper itself at approximately 50 kg.
Q9: The supplier page also shows 55 kg. Which figure is correct?
A: The product description specifies approximately 50 kg for the bumper, while the supplier's additional shipping information lists 55 kg. OFM4x4.co.uk therefore uses approximately 50 kg as the product weight.
Q10: Can the bumper carry the spare wheel?
A: Yes. A spare wheel carrier is included as part of the basic bumper package.
Q11: Is it suitable for larger off-road tyres?
A: A heavy-duty bumper-mounted spare-wheel carrier is particularly useful on modified vehicles running larger or heavier spare tyres. The complete wheel and tyre setup should still be installed and secured correctly.
Q12: Will the bumper affect the vehicle's suspension?
A: The bumper adds approximately 50 kg of permanent rear weight before the spare wheel is included. Vehicles already carrying additional permanent load may benefit from rear springs selected to suit the actual total load.
Q13: Is this bumper road homologated?
A: No. The manufacturer explicitly states that the product does not have road homologation / type approval.
Q14: Can I use the bumper on public roads in the UK?
A: The manufacturer does not supply road homologation for the bumper. The vehicle owner is responsible for confirming compliance with applicable UK vehicle construction, insurance and road-use requirements before using it on public roads.
Q15: Is professional installation recommended?
A: Yes. The bumper is large and weighs approximately 50 kg, so suitable lifting equipment, safe support and correct chassis mounting are important during installation.
Q16: Do you sell other steel rear bumpers?
A: Yes. Browse the 4x4 Steel Rear Bumpers category for vehicle-specific rear bumpers from MotoProject and other manufacturers.
Why Buy from OFM4x4.CO.UK
- MotoProject products supplied in the UK
- Vehicle-specific Nissan Patrol protection upgrades
- Steel front and rear bumper solutions
- 4x4 protection products from multiple specialist manufacturers
- Technical assistance with Patrol Y61 / GU4 product selection
- Supporting suspension, drivetrain and protection upgrades available
- UK-based customer service















-1000x1000w-150x150.jpg)



























