Base Lift kit TeraFlex Lift 3"

Durable kit from TeraFlex

Springs are one of the most safety-critical suspension components of modern vehicles. They affect handling, roadholding and braking performance. TeraFlex springs are made of the highest quality steel, which can withstand additional loads such as steel bumpers or winches. Powder coated, finished in black, they gain corrosion resistance and retain their properties for a long time. Linear rate springs provide the maximum number of active coils under load for consistent performance and predictable handling throughout the full range of suspension travel both on- and off-road.

TeraFlex front sway bar quick disconnects are the industry leader thanks to their ease of use. The sway bar links quickly disconnect and swing up out of the way for unrestricted axle articulation during off-roading. While connected for street use, the link provides immediate reaction during sway bar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber sway bar link bushings. Reduce clearance issues between the tyre and rear sway bar with the TeraFlex rear sway bar link kit with swivel stud. The sealed narrow shoulder tie rod type ball socket on the upper link maximizes tyre clearance, while the sealed ball socket on the lower link provides precise and immediate reaction during sway bar loading thus eliminating excess play.

The rear track bar bracket corrects vehicle roll center, restores factory handling, and reduces body roll in lifted models. Other elements of the kit also will work perfectly in raised vehicles.

Specs:

Increase ground clearance

Levels the front with the rear of the vehicle

Positive, responsive handling

In the box:

(2) Front coil spring

(2) Front sway bar quick disconnect

(2) Rear coil spring

(2) Rear sway bar link

Rear track bar bracket

Bump stops

Transfer case lowering kit

Hardware

Notes:

Requires aftermarket wheels w/ 4.5” backspacing or less or Offset Wheel Adapters for stock wheels (sold separately)

Caster correction and alignment required

Highly recommended for 3” lift Short Shaft Slip Yoke Eliminator Kit TX4444401 (sold separately)

NOT compatible w/ TJ Wrangler/Unlimited Rubicon models

Requires longer shocks (not included in base kit) – Falcon or Fox shock absorbers recommended (sold separately)