Ironman 4x4 Foam Cell Pro Rebuildable Suspension Lift Kit +50mm for Toyota Land Cruiser Prado J95 Long Wheelbase (1996–2002)

Ironman 4x4 Foam Cell Pro Rebuildable Suspension Lift Kit +50mm for Toyota Land Cruiser Prado J95 Long Wheelbase (1996–2002)

This Ironman 4x4 Foam Cell Pro rebuildable suspension lift kit delivers approximately +50mm of lift over factory ride height for the Toyota Land Cruiser Prado J95 Long Wheelbase (1996–2002). It is a premium suspension upgrade for heavy touring loads, harsh terrain, and long-distance use where consistent damping and serviceability matter.

Using Foam Cell Pro monotube shock absorbers with a large 2.0" internal bore, this system increases oil capacity and heat control, helping the suspension perform consistently on corrugations, rough tracks and heavily loaded road miles. The shocks are rebuildable, making this a strong long-term choice for serious builds.

Key Features

• Approx. +50mm suspension lift over standard ride height
• Premium Ironman Foam Cell Pro rebuildable shock absorbers
• Large 2.0" bore monotube design for maximum oil volume
• Rebuildable and serviceable for long-term ownership
• Excellent resistance to heat and shock fade
• Engineered for expedition, towing and demanding off-road use

Vehicle Compatibility

• Toyota Land Cruiser Prado J95
• Body type: Long Wheelbase (5-door)
• Model years: 1996–2002

This kit is designed for Prado J95 long wheelbase models and is not intended for short wheelbase J90 vehicles.

What’s Included

• Ironman Foam Cell Pro front shock absorbers × 2
• Ironman Foam Cell Pro rear shock absorbers × 2
• Front coil springs × 2
• Rear coil springs × 2
• Required bushes and mounting hardware

Foam Cell Pro Technology

• 2.0" internal bore monotube shock design
• Foam cell technology reduces aeration and maintains damping consistency
• Fully rebuildable construction for service and longevity
• Durable alloy body for harsh conditions and heavy use
• Stable damping performance on long, demanding drives

Ride & Load Characteristics

This setup is intended for constant additional weight and demanding use. It suits vehicles fitted with accessories such as steel bumpers, winches, drawer systems, roof loads, towing equipment, or regularly carrying heavy touring gear.

Installation Notes

• Professional installation is strongly recommended
• Wheel alignment required after fitting
• Check brake hose and ABS wire clearance at full droop
• Re-torque suspension fasteners after initial use

Recommended Use

• Overland and expedition builds
• Prado J95 vehicles carrying constant touring weight
• Frequent off-road use and harsh terrain
• Long-distance touring where reliability is critical

FAQs

1. How much lift does this kit provide?
Approximately +50mm over factory ride height.

2. What makes Foam Cell Pro different from standard Foam Cell?
Foam Cell Pro is a larger bore monotube shock that is rebuildable and designed for extreme use with better heat control and durability.

3. Is this suitable for daily driving?
Yes, but it is firmer than NitroGas. It’s best suited to vehicles carrying added weight or used regularly off-road.

4. Are the shocks rebuildable?
Yes. Foam Cell Pro shock absorbers are rebuildable and serviceable.

5. Will this fit Prado J90 short wheelbase models?
No. This kit is designed specifically for Prado J95 long wheelbase (5-door) models.

6. Do I need an alignment after fitting?
Yes. A proper wheel alignment is required after any suspension lift.