Ironman 4x4 Nitro Gas Suspension Lift Kit +50mm + Steering Damper – Toyota Land Cruiser 80 / 105 html Copy code

Improve control, comfort, and stability on your Toyota Land Cruiser 80 / 105 with the Ironman 4x4 Nitro Gas Suspension Lift Kit plus a dedicated Heavy Duty steering damper. Designed to provide an approximate +50 mm lift over factory ride height, this kit is ideal for touring builds that need better road manners, stronger off-road damping, and reduced steering shake on rough surfaces.

The Nitro Gas shocks in this kit are tuned for medium-duty off-road use, while the included steering damper helps reduce kickback through the steering wheel, improving confidence on corrugations, potholes, and bigger tyres.

Key Features

• Approx. +50 mm suspension lift
• Nitro Gas shocks for a balanced ride and stability
• Heavy-duty steering damper to reduce steering vibration and kickback
• Improved ground clearance and off-road capability
• Matched performance coil springs

Vehicle Compatibility

• Toyota Land Cruiser 80 Series
• Toyota Land Cruiser 105 Series
• Model years: 1990– (platform dependent)

Note: This kit configuration includes rear springs rated for 100–300 kg constant load.

What’s Included

• 2 × Rear Nitro Gas shock absorbers – Medium duty, 0–50 mm lift Part code: 12682GR
• 2 × Front Nitro Gas shock absorbers – Medium duty, 0–50 mm lift Part code: 12683GR
• 1 × Heavy Duty steering damper Part code: 3524
• 2 × Front coil springs – Performance 0–50 kg, +50 mm lift Part code: TOY024B
• 2 × Rear coil springs – Performance 100–300 kg, +50 mm lift Part code: TOY013B

All components are genuine Ironman 4x4 parts, supplied new and pre-matched as a complete suspension kit.

Load & Usage Recommendation

• Rear springs suited for a 100–300 kg constant load
• Great for touring vehicles with a rear bar, drawers, towing, or regular cargo
• Steering damper recommended for bigger tyres and rough-road driving

If your Land Cruiser carries lighter or heavier constant loads, contact us before ordering.

Installation

• Direct bolt-on installation
• No cutting or welding required
• Professional fitting recommended
• Wheel alignment is required after installation

Estimated fitting time: 4–6 hours

FAQs

Q: How much lift does this kit provide?
A: Approximately +50 mm over standard factory ride height.

Q: What does the steering damper improve?
A: It helps reduce steering shake, kickback, and vibration, especially on rough roads or with larger tyres.

Q: What rear load are the springs designed for?
A: The rear springs supplied are rated for 100–300 kg constant load.

Q: Is this kit suitable for daily driving?
A: Yes. Nitro Gas shocks provide a controlled ride while improving stability.

Q: Is wheel alignment required?
A: Yes. A professional wheel alignment is required after installation.

Why Buy from OFM4x4 UK

• Authorised Ironman 4x4 distributor
• UK & EU warehouse support
• Correct load matching advice before dispatch
• Fast delivery and expert after-sales support