Steel Engine & Sump Guard – Toyota Land Cruiser 90 / 95 Series J90 J95 1995–2002

Steel Engine & Sump Guard for Toyota Land Cruiser 90 / 95 Series J90 J95 1995–2002

The Bad Label Steel Engine & Sump Guard for Toyota Land Cruiser 90 and 95 Series (J90/J95) is a heavy-duty underbody protection upgrade designed to shield the engine, sump, radiator area and front underside from rocks, ruts, branches and other obstacles encountered during off-road driving.

Manufactured from 2.5mm reinforced steel plate, the guard provides substantially stronger protection than lightweight plastic or composite undertrays and is particularly well suited to Land Cruisers used for green-laning, overlanding, expedition travel, forestry work and demanding off-road terrain.

The guard is compatible with both Toyota Land Cruiser 90 J90 short-wheelbase (SWB) and Toyota Land Cruiser 95 J95 long-wheelbase (LWB) models manufactured between 1995 and 2002, across all engine variants.

External steel reinforcement sections increase resistance to impact, while the powder-coated finish helps protect the guard against corrosion caused by moisture, mud, road contamination and regular outdoor use.

Compatible Vehicles: Toyota Land Cruiser 90 SWB / Land Cruiser 95 LWB (J90 / J95) 1995–2002

Build a complete J90 / J95 underbody protection package:
Steel Gearbox Guard for Toyota Land Cruiser 90 / 95 Series
Steel Fuel Tank Guard for Toyota Land Cruiser 90 / 95 Series

Explore more underbody protection:
4x4 Body & Underbody Protection

Key Features

• Designed for Toyota Land Cruiser 90 and 95 Series
• Compatible with J90 SWB and J95 LWB models
• Suitable for all engine variants
• Protects the engine, sump, radiator and front underside
• Manufactured from heavy-duty 2.5mm steel plate
• External steel reinforcement sections increase impact resistance
• Powder-coated finish for improved corrosion protection
• Approximate weight: 17kg
• Uses vehicle mounting points without structural modification
• Fastening accessories supplied
• Ideal for off-road, overland, touring and working vehicles

Vehicle Compatibility

Technical Overview

Front Underbody Protection for Serious Off-Road Use

The front underside of the Land Cruiser is one of the first areas exposed when approaching rocks, deep ruts, raised ground, tree roots or hidden obstacles.

A direct strike beneath the engine can damage the sump, radiator area or surrounding components, potentially leading to fluid loss, cooling problems or expensive repairs.

This steel guard creates a strong protective barrier between the terrain and vulnerable components underneath the front of the vehicle, making it particularly useful for Land Cruisers that regularly leave paved roads.

Protects More Than Just the Sump

Although commonly referred to as a sump guard or skid plate, this component provides broader front underbody coverage.

Its protection area includes:

• Engine underside
• Engine sump area
• Radiator lower area
• Front underbody components
• Lower front protection area

This wider coverage makes it a useful first component when building a complete protection package for a Land Cruiser J90 or J95.

2.5mm Reinforced Steel Construction

The guard is manufactured from 2.5mm steel plate, providing a strong balance between protection and manageable weight.

External steel reinforcement sections increase rigidity and resistance to deformation during impacts, helping the guard distribute loads across a wider area rather than allowing obstacles to strike vulnerable mechanical components directly.

The complete surface is powder coated to provide additional resistance against moisture and corrosion.

Why Choose Steel Underbody Protection?

• Excellent resistance to direct impacts
• Strong protection against rocks and trail debris
• Less vulnerable to cracking than plastic or fibreglass guards
• Well suited to heavy 4x4 and expedition use
• Reinforced construction helps resist deformation
• Suitable for vehicles regularly driven on difficult terrain
• Provides long-term protection for valuable drivetrain components

Designed for Land Cruiser 90 & 95 Series

This guard is suitable for both major body configurations of the Toyota 90 Series platform:

• Toyota Land Cruiser 90 / J90 – Short Wheelbase (SWB)
• Toyota Land Cruiser 95 / J95 – Long Wheelbase (LWB)

The same platform is also commonly known as the Toyota Land Cruiser Prado 90 and, in the UK market, the Toyota Land Cruiser Colorado.

The guard is suitable for all engine variants where the original chassis and front underbody arrangement has been retained.

Complete J90 / J95 Underbody Protection

For vehicles regularly used off-road, protecting only one area of the underside still leaves other important components exposed.

This engine and sump guard can be combined with our matching gearbox and fuel tank protection products to create a much more comprehensive underbody protection system.

• Steel Gearbox Guard – Toyota Land Cruiser 90 / 95 Series
• Steel Fuel Tank Guard – Toyota Land Cruiser 90 / 95 Series

Together, these components protect three of the most important vulnerable areas underneath the vehicle: the front engine area, transmission and fuel tank.

What’s Included

• 1 × 2.5mm steel engine / sump guard
• Mounting screws / bolts
• Nuts
• Clips
• Required fastening accessories

Important Service Information

This guard does not include an oil sump service opening.

The guard may therefore need to be removed when access to the sump area is required for servicing, depending on the engine configuration and maintenance operation being carried out.

Ideal Uses

• Green-laning
• Overland and expedition travel
• Rocky tracks and rough terrain
• Forestry and agricultural work
• Water crossings with hidden obstacles
• Remote touring
• Recreational off-road driving
• Working 4x4 vehicles
• Daily-driven Land Cruisers requiring additional protection

Recommended Supporting Upgrades

• Steel Gearbox Guard for Toyota Land Cruiser 90 / 95 Series
• Steel Fuel Tank Guard for Toyota Land Cruiser 90 / 95 Series
• Differential protection
• Rock sliders and side protection
• Heavy-duty recovery points
• Suspension lift kit
• Off-road wheels and tyres

Installation

• Designed to use factory mounting locations
• No structural alteration to the vehicle should normally be required
• Required fastening accessories are supplied
• Ensure mounting locations are clean before fitting
• Check clearance around the engine, sump and radiator areas
• Torque all mounting hardware securely
• Re-check mounting hardware after initial off-road use
• Professional installation is recommended if the vehicle has significant corrosion or previous modifications

Estimated fitting time: approximately 1–2 hours depending on vehicle condition, corrosion and workshop equipment.

FAQs

Q1: Does this sump guard fit the Toyota Land Cruiser 90 Series?
A: Yes. It is designed for Toyota Land Cruiser 90 Series vehicles manufactured between 1995 and 2002.

Q2: Does it fit the Toyota Land Cruiser J95?
A: Yes. It is also suitable for Toyota Land Cruiser 95 / J95 long-wheelbase models.

Q3: Will it fit a short-wheelbase J90?
A: Yes. The guard is suitable for short-wheelbase Toyota Land Cruiser 90 / J90 models.

Q4: Will it fit a long-wheelbase J95?
A: Yes. It is compatible with long-wheelbase Toyota Land Cruiser 95 / J95 models.

Q5: Is it suitable for the Toyota Land Cruiser Colorado?
A: Yes. The UK-market Land Cruiser Colorado belongs to the Toyota 90 Series platform. Compatibility assumes the original chassis and front underbody layout has been retained.

Q6: Is it suitable for the Toyota Prado 90?
A: Yes. It is suitable for compatible Toyota Land Cruiser Prado 90 Series J90 and J95 configurations.

Q7: What does this guard protect?
A: It is designed to protect the engine, sump, lower radiator area and front underside from impact and road or trail debris.

Q8: How thick is the steel?
A: The guard is manufactured from 2.5mm thick steel plate with additional reinforcement sections.

Q9: How much does the sump guard weigh?
A: The guard weighs approximately 17kg.

Q10: Does it have an opening for an oil change?
A: No. This version does not have an oil sump service opening, so removal may be necessary for some maintenance procedures.

Q11: Is the guard powder coated?
A: Yes. It is powder coated to provide additional protection against corrosion.

Q12: Are mounting bolts and hardware included?
A: Yes. Screws, nuts, clips and the required fastening accessories are supplied.

Q13: Does installation require drilling?
A: The guard is designed to use the vehicle's factory mounting holes, so structural modification should not normally be required.

Q14: Can I fit this together with the gearbox and fuel tank guards?
A: Yes. The three guards can be combined to provide more comprehensive protection for the engine/front underside, transmission and fuel tank.

Why Buy from OFM4x4.CO.UK

• Toyota Land Cruiser off-road upgrade specialists
• Complete J90 / J95 underbody protection solutions
• Technical support before and after purchase
• UK-based customer service
• Carefully selected products for touring, overland and serious off-road builds