B52 Offroad Coil Spring Lift Kit +40mm – Jeep Grand Cherokee ZJ (1993–1998)

Restore ride height and improve ground clearance on your Jeep Grand Cherokee ZJ (1993–1998) with the B52 Offroad +40 mm Coil Spring Lift Kit. This springs-only solution is ideal for refreshing tired factory suspension while maintaining a balanced ride for daily driving and light to medium off-road use.

The kit provides an approximate +40 mm suspension lift, depending on vehicle condition. It includes four B52 Offroad coil springs engineered specifically for the ZJ platform, offering improved stability, articulation, and load support compared with worn OEM springs.

B52 Offroad springs are designed to work with standard or compatible aftermarket shock absorbers. They deliver a controlled, predictable ride without excessive stiffness, making them suitable for vehicles used on-road with regular off-road excursions.

This kit is a popular choice for owners looking to fit slightly larger tyres, improve approach and departure angles, or replace sagging factory springs without committing to a full suspension overhaul.

Key Features

• Approx. +40 mm suspension lift (vehicle dependent)
• 4 × B52 Offroad coil springs (front & rear)
• Improved ride height and ground clearance
• Balanced spring rates for on-road and off-road use
• Compatible with standard or aftermarket shocks

Vehicle Compatibility

• Jeep Grand Cherokee ZJ
• Model years: 1993–1998

Technical Overview

What’s Included

• 2 × Front coil springs – +40 mm lift
• 2 × Rear coil springs – +40 mm lift

All springs are genuine B52 Offroad components, supplied new and matched specifically for the Jeep Grand Cherokee ZJ platform.

Load & Usage Recommendation

• Designed for standard to lightly accessorised vehicles
• Suitable for daily driving with regular off-road use
• Ideal for replacing sagging factory springs

Installation

• Direct replacement of factory coil springs
• No cutting or welding required
• Wheel alignment recommended after installation
• Professional installation advised

Estimated fitting time: 3–4 hours

FAQs

Q1: How much lift will I gain from these springs?
A: Approximately +40 mm, depending on vehicle condition and existing spring sag.

Q2: Do these springs include shock absorbers?
A: No. This is a springs-only kit. Existing or aftermarket shocks must be used.

Q3: Can I use standard factory shocks?
A: Yes, factory shocks can be used, though upgraded shocks are recommended for best performance.

Q4: Is this kit suitable for heavy off-road use?
A: It is best suited for light to medium off-road driving.

Q5: Will this lift allow larger tyres?
A: Yes, a modest increase in tyre size is possible depending on wheel offset.

Q6: Will brake lines need upgrading?
A: No. Standard brake lines are sufficient for a +40 mm lift.

Why Buy from OFM4x4 UK

• Specialist 4x4 suspension supplier
• UK & EU warehouse support
• Correct vehicle-specific advice
• Fast delivery and dependable aftersales support