Stainless Braided Brake Lines Kit for Toyota Land Cruiser 80 Series 1990–1997 NON-ABS

This stainless braided brake line kit is designed specifically for Toyota Land Cruiser 80 Series models (1990–1997) fitted with a non-ABS braking system. Manufactured in the UK to a high standard, these hoses replace the factory rubber lines to reduce expansion under braking pressure, delivering a firmer pedal feel and more consistent braking performance—particularly beneficial for lifted vehicles, towing and off-road use.

Custom hose lengths can be supplied to suit suspension lift kits, ensuring safe routing and correct slack at full axle droop.

Key Features

• Vehicle-specific braided brake line kit for Toyota Land Cruiser 80 Series
• Suitable for NON-ABS models only
• Firmer brake pedal feel compared to standard rubber hoses
• Improved braking consistency under load and heat
• PTFE inner core with stainless steel braid
• Protective outer coating for abrasion and corrosion resistance
• Custom lengths available for suspension lifts

Vehicle Compatibility

• Toyota Land Cruiser 80 Series
• Model years: 1990–1997
• Braking system: NON-ABS only

If you are unsure whether your Land Cruiser is fitted with ABS, contact us with your VIN or a photo of the engine bay/ABS pump area and we will help confirm the correct kit.

Lifted Vehicles & Custom Hose Lengths

For vehicles fitted with suspension lift kits, extended braided brake lines are strongly recommended. Custom hose lengths can be supplied to suit your setup.

• Tell us your lift height (e.g. 50 mm / 2", 75 mm / 3", 100 mm / 4")
• Advise if extended radius arms, drop brackets or relocated mounts are fitted
• Photos of the axle at full droop can help ensure correct hose length

What’s Included

• Stainless braided brake hoses (vehicle-specific flexible line set)
• Required banjo bolts (where applicable)
• Copper crush washers (where applicable)
• Basic installation guidance

Technical Specifications

• Inner hose: PTFE (Teflon)
• Outer: Stainless steel braid with protective PVC cover
• Fittings: Stainless steel
• Working pressure: approx. 290 bar
• Burst pressure: approx. 870 bar
• Temperature range: -70°C to +260°C

Installation Notes

• Professional installation is strongly recommended
• Brake system must be fully bled after installation
• Check hose clearance at full steering lock and full suspension droop
• Recheck all fittings after the first test drive

Recommended Use Cases

• Lifted Toyota Land Cruiser 80 builds (non-ABS)
• Touring and overland vehicles
• Towing and heavy-load applications
• Off-road and greenlaning use

Shipping & Delivery

• UK delivery via tracked courier
• Custom-length hoses may require additional build time
• If you need the kit by a specific date, contact us before ordering

FAQs

Does this fit ABS Land Cruiser 80 models?
No. This kit is designed specifically for non-ABS 80 Series vehicles. ABS-equipped models require a different hose configuration.

Can I order extended brake lines for a lift kit?
Yes. Provide your lift height and suspension setup and we can supply the correct hose lengths.

Will braided brake lines improve braking performance?
Braided hoses reduce expansion under pressure, typically resulting in a firmer pedal and more consistent braking feel.

Is professional fitting required?
It is strongly recommended, as brake system work must be carried out correctly and safely.