Ironman 4x4 Nitro Gas Suspension Lift Kit +50mm – Mazda BT-50 (2.5 WLT)

Ironman 4x4 Nitro Gas Suspension Lift Kit +50mm – Mazda BT-50 (2.5 WLT)
Ironman 4x4 Nitro Gas Suspension Lift Kit +50mm – Mazda BT-50 (2.5 WLT)
Ironman 4x4 Nitro Gas suspension lift kit for the Mazda BT-50 (2.5 WLT). The kit is listed at +50 mm nominal lift. Spring choice and permanent load affect the height achieved. Match the spring load... Read More
from
£1,437.62
Ex Tax: £1,437.62
  • Stock: Usually in UK/EU Stock
  • Brand: Ironman 4x4
  • Weight: 60.00kg
Product Views: 5765

Available Options

Images are for illustrative purposes only. Product details such as design, finish, and components may vary depending on application. Images represent general quality and style and may not exactly match the supplied item. Specifications do not form part of any contract unless explicitly stated.

Estimated delivery: UK stock 24–48 hours; EU stock 5–7 working days. Stocked bumpers around one week; made-to-order bumpers around 3–4 weeks. Special-order manufacturer lead times are confirmed with you before ordering. These are estimates; check the item-specific availability and delivery guide.

Ordinary consumer distance orders normally allow cancellation until 14 calendar days after delivery, followed by 14 days to send goods back. Necessary inspection and opening ordinary packaging do not by themselves remove this right. No fixed restocking fee applies to statutory consumer cancellation. Whole-order cancellation includes standard outbound delivery. Faulty-goods rights are additional.

Special sourcing, import or manufacture of a standard catalogue product does not by itself remove cancellation rights. Ask for postal/courier return instructions; no customer visits or in-person returns. See our Sales Terms and optional cancellation form. Earlier purchases retain applicable earlier promises.

For a nominal 40 mm lift on the Mazda BT-50 (2011–2019), this B52 Offroad kit groups the suspension components listed below.For the 2011–2019 Mazda BT..
from
£884.03
Ex Tax:£884.03
Add to Cart
For a nominal 50 mm lift on the Mazda BT-50 (2006–2011), this B52 Offroad kit groups the suspension components listed below.For the 2006–2011 Mazda BT..
from
£695.43
Ex Tax:£695.43
Add to Cart
Ironman 4x4 Foam Cell suspension lift kit for the Mazda BT-50 (2.5 WLT). The kit is listed at +50 mm nominal lift. Spring choice and permanent load af..
from
£1,552.29
Ex Tax:£1,552.29
Add to Cart

Ironman 4x4 Nitro Gas suspension lift kit for the Mazda BT-50 (2.5 WLT). The kit is listed at +50 mm nominal lift. Spring choice and permanent load affect the height achieved. Match the spring load rating on each axle to the equipment that stays on the vehicle.


Vehicle fitment

VehicleMazda BT-50 (2.5 WLT)
Front suspensionTorsion bar set
Rear suspensionLeaf spring pair
DampersNitro Gas
Nominal kit lift+50 mm

Construction and what’s included

  • Front axle · 2 Nitro Gas dampers; torsion bar set
  • Rear axle · 2 Nitro Gas dampers; leaf spring pair
  • 1 torsion bar set, 2 U-bolt sets, 1 polyurethane bush kit

Rear spring options

Choose the pair for this axle in the product options. The selected pair is the one supplied.

  • Light · 0–100 kg
  • Medium · 0–200 kg
  • Heavy · 200–400 kg
  • Extra Heavy · 400 kg up to GVM

Related suspension products

See the suspension lift kits by vehicle or contact OFM4x4 for help identifying your vehicle and axle loads.


Frequently asked questions

Which vehicle does this kit fit?

Mazda BT-50 (2.5 WLT). Check the chassis, year and body style before ordering.

How do I choose the front spring setup?

This version uses the front torsion bar set listed in the kit contents.

Which loads are available on the rear axle?

The listed rear spring ratings are 400 kg up to GVM, 0–100 kg, 0–200 kg, 200–400 kg. Count permanent equipment such as drawers, a rear carrier or a fitted canopy. GVM means Gross Vehicle Mass.

Which springs will I receive?

The kit supplies one pair per spring axle. Select the front and rear pairs where shown. Contact us to agree any variant marked for a quote before placing the order.

What height will the kit give my vehicle?

Lift heights are approximate and measured from original factory ride height. Vehicle weight, spring choice, existing suspension condition and accessories affect the result.

What should my installer check?

Check clearances, suspension travel and axle limits. Ask your installer to check wheel alignment after fitting.

Write a review

Note: HTML is not translated!
Rating
Bad Good
Free Delivery
Free delivery over £500
Free Advice
We can advise you on your purchase
Secure Shopping
Secure online connection
Technical Support
You can rely on us, we are here to help
EFS 63-1016 is a mxp shock absorber for the Toyota Land Cruiser.Designed to control suspension movement on rough roads and off-road routes. Select the..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1008 is a mxp shock absorber for the Toyota Land Cruiser / Isuzu NPS 75-300.Designed to control suspension movement on rough roads and off-road..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1025 is a mxp rear shock absorber for the Jeep Wrangler JL 05/2018+.Designed to control suspension movement on rough roads and off-road routes...
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1023 is a mxp rear shock absorber for the Toyota Fortuner / Toyota Prado.Designed to control suspension movement on rough roads and off-road ro..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1022 is a mxp rear shock absorber for the Volkswagen Amarok.Designed to control suspension movement on rough roads and off-road routes. Select ..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1020 is a mxp rear shock absorber for the Toyota Land Cruiser / Toyota Prado.Designed to control suspension movement on rough roads and off-roa..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1019 is a mxp rear shock absorber for the Ram 1500 DS 3L DIESEL & 5.7L V8 PETROL 01/2012 onwards.Designed to control suspension movement on rou..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1018 is a mxp rear shock absorber for the Nissan Patrol / Toyota Land Cruiser and the other applications below.Designed to control suspension m..
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1011 is a mxp rear shock absorber for the Isuzu D-Max / Mazda BT-50.Designed to control suspension movement on rough roads and off-road routes...
from
£302.89
Ex Tax:£302.89
Add to Cart
EFS 63-1010 is a mxp rear shock absorber for the Ram 1500 DT 3L DIESEL & 5.7L V8 PETROL 01/2019 onwards.Designed to control suspension movement on rou..
from
£302.89
Ex Tax:£302.89
Add to Cart