MotoProject Steel Rear Bumper with Spare Wheel Carrier – Land Rover Defender 90 / 110 / 130

The MotoProject Steel Rear Bumper for Land Rover Defender is a heavy-duty replacement rear bumper designed for the classic Land Rover Defender 90, 110 and 130. Built for off-road, expedition, overland and working use, it replaces the standard rear bumper with a substantially stronger steel assembly and incorporates a dedicated spare wheel carrier.

The bumper is supplied in a matte black fine-texture powder-coated finish and includes the required mounting bolts. MotoProject identifies the product under manufacturer reference DEF_002. :contentReference[oaicite:1]{index=1}

A bumper-mounted spare wheel carrier is particularly useful on Defenders fitted with larger or heavier off-road wheel and tyre combinations, helping transfer the spare-wheel load away from the rear door and onto a dedicated heavy-duty rear structure.

Manufacturer: MotoProject

Application: Land Rover Defender 90 / 110 / 130

Manufacturer Reference: DEF_002

Important: the manufacturer states that this bumper does not have road homologation / type approval. The vehicle owner is responsible for checking suitability and legality for the intended road use and jurisdiction. :contentReference[oaicite:2]{index=2}

Land Rover Defender 90 / 110 / 130 Compatibility

MotoProject lists this rear bumper for the classic Land Rover Defender 90, Defender 110 and Defender 130 platforms. :contentReference[oaicite:3]{index=3}

Important fitment note: this listing is for the traditional Defender 90 / 110 / 130 platform and should not be confused with the later Land Rover Defender L663 introduced for the modern Defender generation.

If the vehicle has been substantially modified at the rear, including changes to the crossmember, tow system, rear body or existing wheel carrier, the installation should be checked before ordering.

Heavy-Duty Steel Rear Protection

The rear corners and rear crossmember area of an off-road vehicle can be vulnerable when descending steep obstacles or manoeuvring through rocks, banks, ruts and heavily wooded terrain.

The MotoProject steel rear bumper provides a much more substantial rear protection structure than a lightweight factory-style bumper arrangement.

It is particularly suitable for Defenders used for:

• Off-road driving
• Green laning
• Overlanding
• Expedition travel
• Working and agricultural use
• Remote-area travel
• Heavy touring builds
• Vehicles running larger off-road tyres

Integrated Spare Wheel Carrier

A key feature of this MotoProject rear bumper is the integrated spare wheel carrier.

The carrier provides a dedicated heavy-duty mounting location for the spare wheel rather than relying solely on the Defender's rear door.

This can be particularly useful when fitting:

• Larger-diameter off-road tyres
• Heavier steel wheels
• Heavy-duty alloy wheels
• Oversized expedition spare tyres

Moving the spare-wheel load onto a dedicated bumper-mounted carrier can reduce the load placed on the rear door, hinges and factory wheel mounting arrangement.

Matte Black Fine-Texture Powder Coat

The bumper is supplied in a matte black powder-coated finish with a fine-texture surface. :contentReference[oaicite:4]{index=4}

The finish provides a durable exterior coating suited to off-road accessories and complements the utilitarian design of the classic Defender.

Any coating damage caused by impacts, rocks or abrasion should be repaired promptly to maintain corrosion protection.

Technical Specifications

What’s Included

• 1 × MotoProject Steel Rear Bumper for Land Rover Defender
• 1 × Integrated Spare Wheel Carrier
• Mounting Bolts

Why Use a Bumper-Mounted Spare Wheel Carrier?

The classic Defender commonly carries its spare wheel on the rear door. This is perfectly adequate for many standard vehicles, but increased wheel and tyre weight can place greater stress on the rear-door structure and hinges.

A bumper-mounted carrier transfers this load onto a stronger structure designed specifically to support the spare wheel.

This is particularly relevant for modified Defenders with:

• Oversized tyres
• Steel wheels
• Heavy mud-terrain tyres
• Expedition equipment
• Vehicles regularly driven on rough terrain

Suitable for Off-Road & Expedition Defender Builds

The MotoProject bumper is well suited to Defender builds where rear protection, durability and spare-wheel support are priorities.

Typical vehicle setups include:

• Overland Defender 110 builds
• Expedition Defender 130 vehicles
• Short-wheelbase Defender 90 off-road builds
• Working and farm vehicles
• Green-lane vehicles
• Remote-area touring vehicles
• Defenders fitted with larger tyres and suspension lifts

Rear Protection for Defender 90 / 110 / 130

The Defender's rear area is frequently exposed during off-road use, particularly when descending steep terrain where the rear overhang approaches the ground.

A steel bumper provides a stronger sacrificial protection structure than the vehicle bodywork itself and helps protect vulnerable rear areas against contact with obstacles.

Installation

The bumper is supplied with mounting bolts for installation onto the vehicle. :contentReference[oaicite:5]{index=5}

Due to the size and construction of a steel bumper with a spare wheel carrier, installation should be performed with suitable support and lifting assistance.

• Confirm the vehicle is a compatible classic Defender 90 / 110 / 130
• Remove the existing rear bumper components as required
• Inspect the rear chassis and mounting points
• Repair corrosion or structural damage before installation
• Use the supplied mounting hardware
• Support the bumper safely while positioning it
• Tighten all mounting hardware correctly
• Check spare wheel carrier alignment and operation
• Ensure the wheel carrier closes and latches securely
• Recheck mounting hardware after initial use

Professional installation is recommended where appropriate.

Spare Wheel Carrier Setup

After fitting the bumper, the spare wheel carrier should be adjusted so the spare wheel is securely supported without excessive movement.

Before driving:

• Confirm the wheel is securely mounted
• Check the carrier hinge or pivot operates correctly
• Confirm the carrier closes completely
• Verify that any locking or retaining mechanism is engaged
• Check that the wheel does not interfere with rear lighting or vehicle bodywork

Suspension & Permanent Rear Load

A steel bumper, wheel carrier and spare wheel all contribute to permanent rear axle load.

This should be considered together with other accessories such as:

• Drawer systems
• Roof racks
• Roof tents
• Auxiliary fuel tanks
• Recovery equipment
• Camping equipment
• Towing equipment

Where significant permanent rear load is carried, rear springs should be selected according to the actual vehicle weight and constant-load requirements.

Road Use & Homologation

MotoProject states that this bumper does not have road homologation / type approval. :contentReference[oaicite:6]{index=6}

Regulations relating to aftermarket steel bumpers and external spare wheel carriers vary by country, vehicle type and intended use.

The purchaser and vehicle operator are responsible for confirming compliance with applicable vehicle construction, insurance and road-use requirements before using the modified vehicle on public roads.

Explore More Steel Rear Bumpers

Browse the complete 4x4 Steel Rear Bumpers category for vehicle-specific rear bumpers, spare-wheel carriers and rear protection products from MotoProject and other specialist 4x4 manufacturers.

Frequently Asked Questions

Q1: Which Land Rover Defender models does this bumper fit?
A: The product is listed for the classic Land Rover Defender 90, Defender 110 and Defender 130.

Q2: Does this bumper fit the new Defender L663?
A: No. This product is for the classic Defender 90 / 110 / 130 platform, not the later L663 generation.

Q3: Is the bumper made from steel?
A: Yes. This is a heavy-duty steel rear bumper.

Q4: What finish does the bumper have?
A: MotoProject supplies the bumper in matte black powder coat with a fine-texture finish.

Q5: Is a spare wheel carrier included?
A: Yes. The product is supplied as a rear bumper with an integrated spare wheel carrier.

Q6: Are mounting bolts included?
A: Yes. Mounting bolts are included with the bumper.

Q7: Why use a bumper-mounted spare wheel carrier?
A: It transfers the spare-wheel load from the rear door onto a dedicated heavy-duty carrier, which is particularly useful with larger and heavier off-road tyres.

Q8: Is it suitable for a Defender 90?
A: Yes. Defender 90 is specifically listed as a compatible model.

Q9: Is it suitable for a Defender 110?
A: Yes. Defender 110 is specifically listed as a compatible model.

Q10: Does it fit the Defender 130?
A: Yes. Defender 130 is also specifically listed as a compatible model.

Q11: Is the bumper suitable for larger spare tyres?
A: The integrated heavy-duty wheel carrier is particularly useful for vehicles running larger or heavier spare tyres, provided the wheel and tyre combination is correctly secured and physically suitable for the carrier.

Q12: Will fitting the bumper increase rear axle load?
A: Yes. The steel bumper, carrier and spare wheel all contribute to permanent rear weight and should be considered when selecting rear suspension.

Q13: Is this suitable for off-road use?
A: Its steel construction and integrated spare wheel carrier make it particularly relevant for off-road, expedition, overland and working Defender builds.

Q14: Is the bumper road homologated?
A: No. MotoProject states that the product does not have road homologation / type approval.

Q15: Is professional installation recommended?
A: Yes. Correct chassis mounting, carrier alignment and secure spare-wheel installation are important for safe operation.

Q16: Where can I find other steel rear bumpers?
A: Browse the 4x4 Steel Rear Bumpers category for products from MotoProject and other specialist 4x4 manufacturers.

Why Buy from OFM4x4.CO.UK

• MotoProject products supplied in the UK
• Vehicle-specific Land Rover Defender protection upgrades
• Heavy-duty steel rear bumpers and spare wheel carriers
• Steel rear bumpers from multiple specialist 4x4 manufacturers
• Technical assistance with Defender product selection
• Supporting suspension, drivetrain and protection upgrades available
• UK-based customer service