MotoProject Steel Front Winch Bumper Type 03 – Nissan Patrol Y60 1988–1997

The MotoProject Type 03 Steel Front Bumper is a heavy-duty replacement front bumper designed for the Nissan Patrol Y60 / Patrol GR 1988–1997.

Built for off-road, expedition, overland and working use, the Type 03 bumper combines heavy-duty steel front protection with an integrated winch mounting plate and a supplied aluminium underbody protection plate.

The bumper is supplied in a matte black fine-texture powder-coated finish and includes the required mounting bolts.

Manufacturer: MotoProject

Application: Nissan Patrol Y60 / Patrol GR 1988–1997

Manufacturer Reference: PAT_Y60_003

Winch Ready: Yes – winch mounting plate included

Underbody Protection: Aluminium protection plate included

Important: MotoProject states that this bumper does not have road homologation / type approval. The vehicle owner is responsible for confirming suitability and legality for the intended road use and jurisdiction.

Designed for the Nissan Patrol Y60

This MotoProject Type 03 bumper is designed specifically for the Nissan Patrol Y60 / Patrol GR generation manufactured from 1988–1997.

Important fitment note: this bumper is designed for the Y60 generation and should not be confused with MotoProject front bumpers for the later Nissan Patrol Y61 or GU4 facelift.

Heavy-Duty Steel Front Protection

The standard front bumper on the Nissan Patrol Y60 was designed primarily for conventional road use. A heavy-duty steel replacement bumper provides substantially greater protection when the vehicle is used in demanding off-road environments.

The MotoProject Type 03 bumper helps protect the front of the Patrol from:

• Rocks and ledges
• Deep ruts
• Banks and steep approach angles
• Branches and vegetation
• Off-road impacts
• Working and utility use

This makes it particularly suitable for Patrols used for green laning, overlanding, expedition travel, technical off-road driving and commercial work.

Integrated Winch Mounting Plate

The Type 03 bumper includes a dedicated winch mounting plate as part of the standard package.

This allows a compatible recovery winch to be mounted within the heavy-duty bumper assembly without requiring a separate universal winch tray.

A winch-ready front bumper is particularly useful for vehicles regularly used in:

• Mud
• Deep ruts
• Remote terrain
• Green lanes
• Expedition travel
• Technical off-road conditions
• Recovery work

Important: the winch itself is not listed as included with the bumper.

Aluminium Underbody Protection Plate Included

The Type 03 package includes an aluminium lower protection plate.

This plate provides additional protection underneath the front bumper area and helps shield vulnerable lower components from direct contact with rocks, ruts and debris.

The use of aluminium provides corrosion resistance and keeps the protection plate lighter than an equivalent steel panel while still adding useful impact protection.

Front Protection & Recovery in One Assembly

The MotoProject Type 03 combines several important off-road functions in a single vehicle-specific assembly:

• Heavy-duty steel front protection
• Dedicated winch mounting provision
• Aluminium lower protection plate
• Vehicle-specific mounting hardware

This makes it a practical upgrade for Patrol Y60 builds where front protection and self-recovery capability are both priorities.

Matte Black Fine-Texture Powder Coat

The steel bumper is supplied in a matte black powder-coated finish with a fine-texture surface.

The finish gives the bumper a durable exterior coating while matching the purposeful appearance expected from an off-road protection product.

Any coating damage caused by rocks, impacts or abrasion should be repaired promptly to maintain corrosion protection.

Technical Specifications

What’s Included

• 1 × MotoProject Type 03 Steel Front Bumper for Nissan Patrol Y60
• 1 × Aluminium Underbody Protection Plate
• 1 × Winch Mounting Plate
• Mounting Bolts

Winch Compatibility

The integrated winch mounting plate provides the structure required for installing a compatible vehicle recovery winch.

Before selecting a winch, check:

• Winch mounting bolt pattern
• Overall winch dimensions
• Motor position
• Clutch access
• Fairlead compatibility
• Electrical cable routing
• Required recovery capacity for the vehicle

Because a Nissan Patrol Y60 is a heavy 4x4, the selected winch should be appropriately rated for the vehicle's loaded weight and intended recovery use.

Ideal for Off-Road & Expedition Patrol Builds

The MotoProject Type 03 is particularly suitable for Patrol Y60 builds where the vehicle is expected to operate away from paved roads.

Typical applications include:

• Green-lane vehicles
• Overland builds
• Expedition vehicles
• Working 4x4s
• Recovery vehicles
• Vehicles running larger tyres
• Vehicles with suspension lifts
• Technical off-road builds

Front Axle Load & Suspension Considerations

A steel front bumper, winch and protection plate add permanent weight to the front axle.

This should be taken into account when selecting front suspension, particularly on Patrols also fitted with:

• Heavy-duty winches
• Dual batteries
• Underbody protection
• Engine modifications
• Additional recovery equipment

Where substantial constant front load is added, front springs should be selected according to the actual permanent accessory weight.

Installation

The MotoProject Type 03 is supplied with mounting bolts for installation onto the Nissan Patrol Y60.

• Confirm the vehicle is a Nissan Patrol Y60
• Remove the original front bumper components as required
• Inspect front chassis mounting points
• Repair corrosion or damaged mounting areas before installation
• Fit the bumper using the supplied hardware
• Install and correctly secure the aluminium lower protection plate
• Install the winch using suitable rated hardware
• Confirm correct fairlead alignment
• Ensure winch cables are protected from heat and abrasion
• Torque all mounting hardware correctly
• Recheck fasteners after initial use

Professional installation is recommended where appropriate.

Winch Installation Notes

A recovery winch can generate extremely high loads. Correct installation is therefore essential.

• Use the correct winch mounting bolts and grade
• Follow the winch manufacturer's installation instructions
• Ensure the fairlead is centred with the winch drum
• Use correctly sized electrical cables
• Protect cables from sharp edges and moving components
• Use appropriate battery and isolation equipment
• Check winch operation before off-road use

Road Use & Homologation

MotoProject states that this bumper does not have road homologation / type approval.

Regulations concerning aftermarket steel bumpers, winch systems and external vehicle modifications vary by country and vehicle category.

The purchaser and vehicle operator are responsible for confirming compliance with applicable vehicle construction, insurance and road-use requirements.

Explore More 4x4 Front Steel Bumpers

Looking for another bumper design or a front bumper for a different 4x4? Browse the complete 4x4 Front Steel Bumpers category at OFM4x4.co.uk.

The category includes vehicle-specific steel front bumpers and winch-ready front protection systems from MotoProject and other specialist 4x4 manufacturers.

Frequently Asked Questions

Q1: Which Nissan Patrol does the MotoProject Type 03 bumper fit?
A: It is designed for the Nissan Patrol Y60 / Patrol GR generation.

Q2: What years does the Nissan Patrol Y60 Type 03 bumper fit?
A: The Nissan Patrol Y60 application is 1988–1997.

Q3: Does this bumper fit the Nissan Patrol Y61?
A: No. Y61 and GU4 models use different front bumper designs.

Q4: Is the Type 03 bumper made from steel?
A: Yes. The main bumper structure is manufactured from steel.

Q5: What finish does it have?
A: MotoProject supplies the bumper in matte black powder coat with a fine-texture finish.

Q6: Is the bumper winch ready?
A: Yes. A dedicated winch mounting plate is included in the standard package.

Q7: Is the winch included?
A: No. The bumper includes the winch mounting plate, but the winch itself is not listed as included.

Q8: Is underbody protection included?
A: Yes. MotoProject includes an aluminium lower protection plate with the Type 03 bumper.

Q9: Is the underbody protection steel or aluminium?
A: The Type 03 product listing specifically states that the lower protection plate is aluminium.

Q10: Are mounting bolts included?
A: Yes. Mounting bolts are included.

Q11: Are LED lights included?
A: LED lights are not listed as part of the standard Type 03 package. This differs from some other MotoProject Y60 bumper versions.

Q12: Is the bumper suitable for off-road recovery use?
A: Yes. The integrated winch plate makes it suitable for installing a compatible recovery winch, provided the winch and installation are appropriately rated.

Q13: Will fitting the bumper affect the front suspension?
A: A steel bumper and winch add permanent front axle load. Vehicles carrying substantial additional front weight may require appropriately rated front springs.

Q14: Is the bumper road homologated?
A: No. MotoProject states that the product does not have road homologation / type approval.

Q15: Is professional installation recommended?
A: Yes. Correct bumper mounting, winch installation and underbody plate fitment are important for safe operation.

Q16: Where can I find other front steel bumpers?
A: Browse the 4x4 Front Steel Bumpers category for products from MotoProject and other specialist manufacturers.

Why Buy from OFM4x4.CO.UK

• MotoProject products supplied in the UK
• Vehicle-specific Nissan Patrol Y60 protection products
• Winch-ready steel front bumpers
• Front bumper and underbody protection solutions
• 4x4 steel front bumpers from multiple specialist manufacturers
• Technical assistance with Nissan Patrol product selection
• Supporting suspension, drivetrain and recovery upgrades available
• UK-based customer service