Suspension Lift kit TeraFlex Alpine CT2 short arm Lift 2,5" – Jeep Wrangler JL 2-door

Vehicle fitment

Jeep Wrangler JL 2-door — 2.0L / 3.6L engines. Product reference: TX1522200.

Check the installation requirements and exclusions below. Please confirm the model year and left- or right-hand-drive configuration with OFM4x4 before ordering.

Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

The 2,5” Alpine CT2 Short Arm Suspension System was designed for the enthusiast who wants to fine tune their suspension. Alpine Short Control Arms allow tuning of the caster and pinon angles, centering of the axles in the wheel wells, and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system.

Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 0-4,5” lifts.

The Front HD Forged Adjustable Track Bar and Track Bar Axle Bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat.

TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

Specs:

Increases ground clearance

Allows larger wheels to be fitted

Improves handling, reduces noise and vibration

Improves steering response

Provides full range of motion

In the box:

(2) Front coil spring Lift 2,5"

Short control arm kit Alpine

Front forged adjustable track bar

Front track bar axle bracket

Front progressive bump stop kit

Front bump stop extension kit

Front bump stop strike pad shim kit

Front sway bar quick disconnect kit

Rear sway bar link kit w/ Swivel Stud

Rear bump stop strike pad shim kit

Rear bump stop extension kit

Rear progressive bump stop kit

Rear track bar axle bracket

(2) Rear coil spring Lift 2,5"

All necessary hardware 

Notes:

Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) 

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres

Sport/Sahara Fenders Require 3” Front And 2,5” Rear Bump Stop Extensions and Shims to fit 35” tyres

Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres

Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres

Alignment required