Suspension Lift kit TeraFlex Alpine CT3 Lift 3,5"

Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) suspension systems build on the Sport ST (Street & Trail) suspension systems.

A 3,5" suspension system opens up a new world of tyre sizes and off-road possibilities. If you have that "do it all" attitude, one of the 3,5” Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Short Arm features the Alpine Short Control Arms as well as a Front HD Forged Adjustable Track Bar, and Front and Rear Track Bar Axle Brackets for maximum tunability and flawless performance for years to come.

Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tyre position on vehicles with 0-4,5” lifts.

The Front HD Forged Adjustable Track Bar and Track Bar Axle Bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling. 

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

Specs:

Increases ground clearance

Allows larger wheels to be fitted

Improves handling, reduces noise and vibration

Improves steering response

Provides full range of motion

In the box:

(2) Front coil spring Lift 3,5"

Short control arm kit Alpine

Front forged adjustable track bar

Front track bar axle bracket

Front progressive bump stop kit

Front bump stop extension kit

Front bump stop strike pad shim kit

Front sway bar quick disconnect kit

Front brake line anchor kit

Rear sway bar link kit w/ Swivel Stud

Rear bump stop strike pad shim kit

Rear bump stop extension kit

Rear progressive bump stop kit

Rear track bar axle bracket

(2) Rear coil spring Lift 3,5"

All necessary hardware 

Notes:

Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately) 

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres

Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres

Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres

Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres

Alignment required