Suspension Lift kit TeraFlex Alpine CT4 long arm Lift 4,5"

Lift your vehicle with suspension kit from TeraFlex

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on the Sport ST (Street & Trail) Suspension Systems. The 4.5" Alpine CT4 Long Arm Suspension System is engineered for the enthusiast who demands an off-road capable suspension with maximum adjustability flex durability and quiet performance. This all-inclusive system includes everything from the TeraFlex exclusive brake line anchor brackets to industry leading adjustable Alpine Long Control Arms and brackets. The Alpine CT4 is designed to flex and droop over boulders and fly across flats like nothing you have ever experienced. And like all TeraFlex lifts the highway manners of the CT4 are legendary.

Durable components

Adjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position. The Front HD forged adjustable track bar and front and rear track bar axle brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise vibration and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

Specs:

Increases ground clearance

Allows larger wheels to be fitted

Improves handling, reduces noise and vibration

Improves steering response

Full range of movement for off-road flex and articulation

In the box:

Front adjustable track bar Alpine

(2) Front coil spring

Front track bar bracket

(2) Front brake line anchors

Bracket kit for Alpine long arm

(2) Front quick disconnect sway bar kit

(2) Front upper adjustable long control arms Alpine

(2) Front lower adjustable long control arms Alpine

(2) Rear upper adjustable long control arms Alpine

(2) Rear lower adjustable long control arms Alpine

(2) Rear coil spring

Rear track bar bracket

(2) Rear extended sway bar link

Front & rear 2" bump stop strike pad kit

Front & rear 0,5" bump stop strike pad shim kit

Progressive bump stop kit Falcon

Hardware

Notes:

Requires aftermarket wheels w/ 4.75” backspacing or less

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres

Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tyres

Sport/Sahara Fenders require 3.5” front and 4” rear bump stop extensions and shims (included) in order to fit 37” tyres

Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tyres

Alignment required

Requires longer shocks, Falcon Performance Shocks recommended (sold separately)

Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances

May require an additional 0.5” Bump Stop Strike Pad Shim Kit TX1959300 (sold separately)

Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets