Suspension Lift kit TeraFlex Base Lift 4,5" – Jeep Wrangler JL 4-door

Vehicle fitment

Jeep Wrangler JL 4-door — 2.0L / 3.6L engines. Product reference: TX1402400.

Check the installation requirements and exclusions below. Please confirm the model year and left- or right-hand-drive configuration with OFM4x4 before ordering.

Lift your vehicle with suspension kit from TeraFlex

Engineered with drivability and performance in mind, the TeraFlex JL 4-Door: 4.5” Coil Spring Base Lift Kit includes the basic pieces needed to lift your JL Wrangler to conquer the most extreme trails and conditions. Every TeraFlex suspension system is engineered with drivability and performance in mind. Properly developed suspension geometry, roll center, load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle.

Specs:

Lift Height:4,5”

Dependable performance w/ zero worries

Positive, responsive handling

Full range of movement for off-road

Install and drive

All factory stability controls remain functional

In the box:

Front Track Bar Axle Bracket (TX1953500)

Front Sway Bar Link Kit

Rear Track Bar Axle Bracket (TX1953600)

Rear Sway Bar Link Kit w/ Swivel Stud

Front & rear 4.5” Lift Coil Spring Kits

Front & rear 2” Bump Stop Strike Pad Extension Kit

Front & rear 0,5” Bump Stop Strike Pad Shim Kit

All necessary hardware

Max Tyre Diameter:

Sport/Sahara : 35” (w/ 3” front & 2.5” rear bump stops)

Sport/Sahara : 37” (w/ 3.5” front & 4” rear bump stops)

Rubicon : 37” (w/ 2.5” front & 3” rear bump stops)

Notes:

Caster correction required 

Sport & Sahara models require aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyres

Sport/Sahara models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 35” tyres

Sport/Sahara models require an additional 0.5” Front & Rear Bump Stop Strike Pad Shim Kit TX1959300 (sold separately) in order to fit 37” tyres

Rubicon models require the INCLUDED 0.5” front & 0.5” rear bump stop strike pad shims in order to fit 37” tyres

JL/JLU: Front Control Arm Sport Brackets (# 1938125) recommended to correct caster angles and restore factory geometry

Requires longer shocks (sold separately)