Suspension Lift kit TeraFlex RHD Sport ST2 Lift 2,5" — Wrangler JL 4-door 2018 onwards

Lift your vehicle with TeraFlex

Developed for the Jeep enthusiast looking for highway stability and trail performance in a no compromise package, the 2,5” Sport ST2 Suspension System builds on standard 2,5” Coil Spring Base Lift Kit by adding preset Front Lower Sport Flexarms and Falcon Progressive Bump Stops. The Sport ST2 Suspension System can be installed on Friday, wheeled on Saturday, and driven to church on Sunday! Does not include shocks. We recommend FOX Shock absorbers for superior performance. Every TeraFlex suspension system is engineered with drivability and performance in mind. Properly developed suspension geometry, roll center, and load tuning ensures that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle.

Specs:

Lift height: 2,5”

Install & drive simple bolt-on installation – no welding required

Dependable performance w/ zero worries

Positive, responsive handling w/ reduced noise, vibration, & harshness (NVH)

Preset front lower Sport flexarms optimize correct caster & pinion angles for 2.5-3.5” lift kits

Falcon Progressive bump stops provide progressive compression during high-speed suspension movement 

Max tyre diameter:

Sport | Sahara (with 3” front & 2.5” rear bump stops): 35”

Rubicon (with 2” front & 2” rear bump stops): 35"

Rubicon (with 2.5” front & 3” rear bump stops): 37”

In the box:

Front coil spring Lift 2,5"

Front lower sport control arm kit

Front progressive bump stop

Front bump stop strike pad extension kit

Front bump stop strike pad shim kit

Front sway bar quick disconnect kit RHD

Rear sway bar link kit w/ Swivel Stud

Rear bump stop strike pad shim kit

Rear bump stop strike pad extension kit

Rear progressive bump stop

Rear track bar axle bracket RHD

Rear coil spring Lift 2,5"

All necessary hardware 

Notes:

Fits right-hand drive models ONLY

Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 (sold separately)

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tyre

Alignment required

Does NOT include shocks, we recommend FOX Shock absorbers for superior performance (sold separately)

NOT recommended for vehicles with heavy load. If you have any doubts, please contact our sales department

NOT recommended for Diesel models

For Diesel models spacer load level kit TX1155100 is required (sold separately)