Suspension Lift kit TeraFlex with VSS 9550 Twin-Tube Shocks Lift 3" – Jeep Wrangler JK 4-door

Vehicle fitment

Jeep Wrangler JK 4-door. Product reference: TX1251200.

Check the installation requirements and exclusions below. Please confirm the model year and left- or right-hand-drive configuration with OFM4x4 before ordering.

Lift your vehicle with suspension kit from TeraFlex

Engineered with drivability and performance in mind, the TeraFlex JKU Base 3” lift kit w/ 9550 VSS shock absorbers includes the basic pieces needed to lift your JKU to tackle some serious trails. Not only do TeraFlex kits drive straight, but they will crawl over anything to get you there and back!

Specs:

Increased ground clearance

Easy installation

Gives aggressive look

Max tyre diameter: 35"

In the box:

Front 3” lift coil springs

Front sway bar disconnects

Rear 3” lift coil springs

Rear track bar bracket

Rear sway bar links

Bump stops

9550 VSS Twin-Tube Shocks

All necessary hardware

Notes:

Requires aftermarket wheels w/ 4,5” backspacing or less – or Offset Wheel Adapters for stock wheels (sold separately)

2012-2018 JK/JKU models require Exhaust Spacers TX2610000 or other exhaust modification for proper driveshaft clearance (sold separately)

Driveshaft modifications are recommended with this suspension system, see the TeraFlex Rzeppa high angle CV kit TX1744014 (sold separately)

2007-2011 JK/JKU models will require extended length front brake lines TX4353300 (sold separately)

Requires 2,5-4” Adjustable Alpine Flexarms TX1415610 or 3-6” Adjustable Alpine Long Flexarms TX1315010 and HD Forged Adjustable Front Track Bar TX1753418 to set correct suspension geometry including caster angle, pinion angle, roll center, & load tuning during re-alignment after installation (sold separately). Proper suspension geometry ensures all stability controls function within factory parameters

Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” tyres