Published 19 November 2026 · OFM4x4.co.uk

A pressure that felt comfortable when the vehicle was empty may not be right for a trip with passengers, water and roof cargo. The correct reference is the vehicle and tyre guidance for the load.

The quick answer

Start with the vehicle manufacturer's cold-pressure recommendation for the chosen approved tyre and load. Confirm any alternative fitment with the tyre maker or competent specialist.


Record the actual load

List people, luggage, permanent accessories and trailer nose load. Weigh axle loads when possible. Do not exceed the permitted vehicle, axle, tyre or wheel ratings.


Use cold readings

Check before driving, with a reliable gauge, and follow the vehicle's loaded setting. Heat generated in use raises measured pressure; do not release air from a normally warm tyre to match the cold figure.


Check all tyres

Include the spare, valve condition and visible damage. Confirm the pressure monitor's reset procedure after changing pressures, if the vehicle has one. A warning light should be investigated, not merely cleared.


Reassess at the end

Remove temporary load and return to the appropriate ordinary-use setting. Record what the vehicle carried and how the tyres performed without treating subjective feel as a substitute for specifications.


Specification checklist

Before ordering or booking work, have these details ready: Vehicle tyre placard, full tyre markings, axle weights, wheel ratings and load plan.


Frequently asked questions

Should every 4x4 use the same off-road pressure?

No. The appropriate setting depends on the vehicle, tyre, load, terrain and tyre maker's guidance.

For an application check, contact OFM4x4.co.uk with the vehicle and component details above. Confirm the current fitting instructions for the exact product before work starts.

Technical reference: www.gov.uk. The relevant product manual takes priority over general guidance.