Ironman 4x4 FoamCell Suspension Lift Kit +50mm – Nissan Navara D40

Upgrade your Nissan Navara D40 with the Ironman 4x4 FoamCell Suspension Lift Kit, a complete suspension solution designed to improve ground clearance, stability, and control for daily driving, work use, touring, and regular off-road conditions.

This configuration delivers approximately +35 mm lift at the front and +50 mm lift at the rear, depending on vehicle setup and load. The system combines adjustable FoamCell front struts with heavy-duty rear leaf springs and all required fitting hardware.

Ironman 4x4 FoamCell shock absorbers are engineered for intense off-road use. With increased oil capacity and foam cell technology, they offer improved heat management and consistent damping compared to standard gas shocks.

Key Features

• Approx. +35 mm front / +50 mm rear suspension lift
• FoamCell shock absorbers for intense off-road use
• Adjustable front struts for accurate ride height setup
• Rear leaf springs rated for additional constant load
• Complete kit including bushes, shackles, and U-bolts

Vehicle Compatibility

• Nissan Navara D40

What’s Included

• 2 × Front FoamCell adjustable strut shock absorbers – Intense off-road, 0–50 mm Part code: 24716FE
• 2 × Front coil springs – Permanent front load 0–50 kg, approx. +35 mm lift Part code: NISS040B
• 2 × Rear FoamCell shock absorbers – Intense off-road, 0–50 mm Part code: 24717FE
• 2 × Rear leaf springs – Performance 0–300 kg, +50 mm lift Part code: NISS041B
• 4 × U-bolts (2 kits) for rear leaf springs Part code: 437UBK
• 1 × Polyurethane greasable bush kit for rear leaf springs Part code: 769UK
• 2 × Greasable rear shackles Part code: 797-1

All components are genuine Ironman 4x4 parts, supplied new and correctly matched as a complete suspension system for the Nissan Navara D40.

Load & Usage Recommendation

• Front springs suited for 0–50 kg permanent front load
• Rear leaf springs rated for 0–300 kg constant load
• Ideal for work vehicles, touring builds, towing, and regular off-road use

Installation

• Direct bolt-on installation
• No cutting or welding required
• Wheel alignment required after installation
• Professional installation recommended

Estimated fitting time: 5–7 hours

FAQs

Q: How much lift does this kit provide?
A: Approximately +35 mm at the front and +50 mm at the rear, depending on vehicle setup.

Q: What are FoamCell shock absorbers best suited for?
A: They are designed for intense off-road use, offering improved heat control and consistent damping.

Q: Is this kit suitable for towing?
A: Yes. The rear leaf springs are rated for up to 300 kg constant load.

Q: Are the front struts adjustable?
A: Yes. The front FoamCell struts are adjustable for correct ride height.

Q: Is wheel alignment required after installation?
A: Yes. A professional wheel alignment is required after fitting.

Why Buy from OFM4x4 UK

• Authorised :contentReference[oaicite:0]{index=0} distributor
• UK & EU warehouse support
• Correct load-matched suspension advice
• Fast delivery and reliable aftersales support